thanks very much gold.. i'm will try that next mill part, but this is a lather part it thick 2.67 ID it 1.8505 on top and bottom, start crooves from top down.77 start on 1.8505 dia cut big in crooves 2.3/4 dep .75 ,i'm use slotmill can't use endmill

i'm never do slotmill sst 304 or 316 befor ,anyone exp can you help me, i use slotmill 1.25x.25 thick cut hole from 1.85 to 2.3/4 dep .75- i'm need feed and speed, anyone help thanks,i use hst slotmill s450 F8. it break my slotmill, so now i'm need Carbide using i'm need speed and feed , thanks very much

anyone exp on sst 304 or 316 i'm use slotmill start dia 1.85 cut big to 2.3/4 dia dep 3/4 , need have feed and speed, i'm use cut .03,dep cut .25, my speed s450 and F8. feed it bun my slot mill ,now buy my shop buy new carbide slotmill, anyone help thanks [ 04-06-2010, 10:58 PM: Message edited by: Supercar 2006 ]

i have try 1machine to day haas have usb but they not see or read usb do you know why? and 1-more-think im readymakes program run with pick drill jlk, but some this machine haas not working with this, how can changer it , in setting?garphic

thanks

SO FAR FOR ME ,ANYONE HAVE THIS PROLEM, TOO MANY POCKET NEED REMOVE,I USE 2D-HST TOOLPATH IN MU3 AREAMILL, THEY CAN'T RUN MULTI POCKET SAME TIME ?, THEY NEED MAKE TOOLPATH ONE BY ONE POCKET??, IT CAN'T OPEN COMP?, THANKS YOU GUY

i think if own or Supervisor like you say mick, lets me or some body ready programmer try it, i'm think we can do it, only one think they have lucky can touch on that machine or not

it hard, own lets you try on that machine because expensive, basic to do toolpath hmc ,make toolpath firt and fater that transform all toolpath to rotate 90?, and need post horizontal machine? or wcs plane? how offer set onmachine set x,y,z at center part?, i'm have some programmer on v9 they use wcs makes 4 axis, so that correc or transform rite

do you know where web can buy book or class have machine can learn horizontal or rotary turn machine ,school they have machine i can do program on there

dave im work last shop they buy sim it cost 14000$ level 3 with soilds, im have that in hand all time, i dont need crack it is, i hope you give me 1, i can open in home to learn more about horizotal

CNC Apps Guy 1 THANKS , im have 1 shop offer full time on next monday, and 2job work 1099, i will call edd ask them, maybe they can lets me know about that, anyway thanks for you help

THANKS chopsley , my last job own he Portland, i'm just say thanks they lets me learn program from there

I'M DONE formax C DRIVE WITH THAT READY, GIVE BACK SIM TO OLD SHOP , THANKS IOWAJIM62 [ 03-04-2010, 11:14 PM: Message edited by: Supercar 2006 ]

thank bryan, [ 03-04-2010, 10:20 PM: Message edited by: Supercar 2006 ]

i'm buy you pho*~ dave

i'm undestand that bussines .... mayday , maybe lastshop i work 1 week tell me rite don't think peole with peole or person too much.,that asian not in united [ 03-04-2010, 06:58 PM: Message edited by: Supercar 2006 ]

i'm worry, full time job not work toolong( this time rite now), if i'm have job 1099 and i'm can't get back EDD, because i'm have 2 shop cheat me, when come there make program a week make too many part for them. or maybe they don't have any more prototype , or they have progam ready ,they want setup guy run part.cheap than pay progammer, buxxxx this.. that, and i'm get ....

thanks

do you know how to set RS232 in mastercam x4 send to haas or any machini, i'm allway use usb or floppy befor

so if i have 1 shop offer working pulltime right now, and i'm get working with an shop pay 1099, the shop 1099 they have prolem later for EDD? if pulltime job no longer working.,so if they subtract on my check onweek i'm have job, if next week nolong work, i'm can clam back edd

1099 that good for part time work or ready have pull time rite, thanks you guy

ANYONE WORK WITH 1099 BEFOR?? IT HAVE PROLEM EDD ,if shop don't have anythink to do??

Thanhson Ngoc Nguyen ----------------------------- Home :(408) 938 - 0636 San Jose, CA Cell :(408) 592 - 2507 EMAIL:[email protected] ------------------------------------------------- Obiective: CNC Mill Machinist/Programmer Skill Summary: - Good people, Easy to work with, Positive attitude - CNC Vertical Mills, Program operate and setup, 3D -2D, PARTS WITH 2 ANGLE ON 3AXIS VERTICAL - Set up and operate Manual Mill - Strong Knowledge of Manual Lathe - Run IGES,STP,DXF,Solidworks ,CAD file - Machine Maintenance - Precision Tolerances, Measurements - Read Blueprints, Close Tolerances, Drawings, Dimensioning & Tolerances Control - Computer Software, PC repair ... - Able to utilize variety of hand tools. - Hard working and fast- short time machine run - experience hand to work with company have ISO Over 12 years CNC experience including prototype programming and, machining Some of the companies supported: - LOCKHEED- MARTIN, - FLEXTRONICS, KLA TENCOR, TCI, CUTERA, PMC, - PLANTRONICS, THERMAGE, PROMETRIX, INNOVATIVEIMAGING INC - OPTIMEDICA CORPORATION, LUMENIS, THEMOQUEST, PHOTONDYNAMICS - PARAMIT CORPORATION, NEXTEST, CARDINALHEALTH Materials: Aluminum, Stainless Steel, steel, copper, brass, ceramic, plastic, nylon, pvc plastic Work History: 2/2010- 3/2010 PTH - Manufacturing INC, San Jose, CA CNC Machinist - CNC Mill program/setup operate - 7Akira Seiki (Mitsubishi Controls) 12/1999-12/2009 EURO Manufacturing & Engineering, Morgan Hill, CA CNC Programmer/Machinist : - Programmed set up and operated - Fanuc-vertical Mill 2D AND 3D, PART 2 ANGEL - 2 Haas vf 2,1 super haas vf 2 - 1 Haas vf 4, 1 Haas vf 3 - Manual lathe and mill 9/1998-9/1999 GNK Machine , San Jose, CA CNC Machinist/ Operator - CNC Mill setup and operate - Mills Haas vf3, Akira Seiki - Manual Lathe 5/1997-7/1998 Acer America , San Jose, CA Mechanical Mechanical Assembler/Expeditor - Assemble Power cable/supply, CD-rom drive, floppy drive - Responsible for distribution of motherboards Education: - 1994-1998 Dai Hoc Mo University, Viet Nam - 2000 ESL College . Sunnyvale, Ca - Mastercam v 9.1 and Mastercam X - 2002 - Mastercam-Cad Cam software Inc., X3 - 2008 - Mastercam-Cad Ccam sofware Inc., X4 -2009 Familiar with Mastercam v9.1 to X4 MU3 Capable of post program and set up: - Haas, Mazak 680 Mill , Kitamura , Okuma, Akira Seiki (Mitsubishi), - Heidenhain, Heian Sharnoa Tiger 4, Mitsubishi., Milltronic, Supermax - Matsuura, Dynamyte 2400, Multicam, Boston Digital, Yasnac, Mazak EIA - P&W Viking Teammate 6400. Triac, Kearney & Trecker - Anorad(flame cutter), Linde(plasma cutter) Reference : Available upon request

tinhman where your work bro they have open or hiring machinic ? im still looking full time work, if you know any shop open can you give me call, thanks bro