i'm have prolem tranfrom toolpart make superprogram in some too contour, but program pickup wrong proram (superpro drill). in g55

you can get old x3 +,you need custom toolbar for it in x4

EazyE go in this web gmccs.de (x+ can using in x3 and x4)

in operations manager green>>>machine group properties>>>> tool setting>> check assign tool numbers and warn of duplicate tool number or in control drfinition >>> operation >>>tool setting lick in there or right lick all turn on coolar, it come out all time your set tool, itshould be working fire

i'm think using x+ in x3 to x4 much better than this... setup sheet, this to much paper to print

USE X3 X+ WORK X4 [ 06-18-2009, 06:19 PM: Message edited by: thanhson ]

thanks for you time, i'm learning ,i'm try and know line 849, but don't know (2142, 2202,2219, 3396), i'm copy paste again ,now working good thanks again

i'm have some line miss i'm don't know what line... my debugger notworking i'm can't check it, can you help me out with this thanks out time 17 Jun 2009 08:52:17 AM - <2> - The post product type is Mill. 17 Jun 2009 08:52:17 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful. 17 Jun 2009 08:52:17 AM - <2> - Search for defined post variables, strings, postblocks was successful. 17 Jun 2009 08:52:18 AM - <2> - PST LINE (849) - The start string is missing 17 Jun 2009 08:52:18 AM - <2> - PST LINE (2142) - Label has not been defined[26] 17 Jun 2009 08:52:18 AM - <2> - PST LINE (2202) - Label has not been defined[26] 17 Jun 2009 08:52:18 AM - <2> - PST LINE (2219) - Label has not been defined[27] 17 Jun 2009 08:52:18 AM - <2> - PST LINE (3396) - Label has not been defined[26] 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ltol$' was re-initialized from 0.0005 to 0.002 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'minarc$' was re-initialized from 0.0005 to 0.002 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'atol$' was re-initialized from 0.5 to 0.01 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'err_file$' was re-initialized from 0. to 2. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'bldnxtool$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrk$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrkxz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrkyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrk$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrkxz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrkyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutput$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputxz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larcoutput$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larctypexz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larcoutputyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcs$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsxz$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsyz$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcs$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsxz$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsyz$' was re-initialized from 0. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arc$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arcxz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arcyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arc$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arcxz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arcyz$' was re-initialized from 1. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arccheck$' was re-initialized from 111. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larccheck$' was re-initialized from 111. to 1. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 0. 17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'sub_level$' was re-initialized from 0. to 0. 17 Jun 2009 08:52:18 AM - <2> - Successful completion of posting process!

ipr that feed takes more longer, i'm ready know how too changer it thanks for you guy help ..., if someone still , try in !feed ..(tap) remove ! ,it shuold be fire

i'm try delte it and it come ok, but don't know have anything later prolem in part not? if mi6$ = 1 | ((opcode$ = 3 | opcode$ = 16) & drillcyc$ = 3 & use_pitch), - but it come out g94 same drill how to delte g94

and feed rate come out 9FPT0 F.0179.. nay one help pls

ANYONE HELP WITH DID PROLEM g94 and g95 HOW TO TURN OFF POST USING HAAS N100 G00 G17 G20 G40 G80 G90 N110 T5 M06 ( #49 DRILL) N120 (MAX - Z2.) N130 (MIN - Z-.971) N140 G00 G17 G90 G54 X.601 Y-.194 S5000 M03 N150 G43 H5 Z2. M08 T6 N160 G94 N170 G98 G83 Z-.971 R-.641 Q.03 F10. N180 Y-1.006 N190 G80 M09 N200 M05 N210 G91 G28 Z0. N220 M01 N230 T6 M06 ( #2-56 TAPRH) N240 (MAX - Z2.) N250 (MIN - Z-.22) N260 G00 G17 G90 G54 X1.0805 Y-.412 S100 M03 N270 G43 H6 Z2. M08 T5 N280 G95 N290 G98 G84 Z-.22 R.1 F.0179 N300 Y-.788 N310 G80 M09 N320 M05 N330 G91 G28 Z0. N340 G28 Y0. N350 M30

ANYONE HELP WITH DID PROLEM HOW TO TURN OFF POST USING HAAS N100 G00 G17 G20 G40 G80 G90 N110 T5 M06 ( #49 DRILL) N120 (MAX - Z2.) N130 (MIN - Z-.971) N140 G00 G17 G90 G54 X.601 Y-.194 S5000 M03 N150 G43 H5 Z2. M08 T6 N160 G94 N170 G98 G83 Z-.971 R-.641 Q.03 F10. N180 Y-1.006 N190 G80 M09 N200 M05 N210 G91 G28 Z0. N220 M01 N230 T6 M06 ( #2-56 TAPRH) N240 (MAX - Z2.) N250 (MIN - Z-.22) N260 G00 G17 G90 G54 X1.0805 Y-.412 S100 M03 N270 G43 H6 Z2. M08 T5 N280 G95 N290 G98 G84 Z-.22 R.1 F.0179 N300 Y-.788 N310 G80 M09 N320 M05 N330 G91 G28 Z0. N340 G28 Y0. N350 M30

ok, i'm try that wcs top set same plane my totpart, if come ok now thanks for help that, but if work fire in x3...., so i'm need to change all my old file????? if use x4

i'm ready try set wcs toolpart on top but it still erro, if i'm post only one ops it come fire, when itry post muti ( ops) try come erro

any one have erro post from jim 15 Jun 2009 12:15:50 PM - <0> - Report created. 15 Jun 2009 12:15:50 PM - <2> - Initialize posting log file 15 Jun 2009 12:15:50 PM - <2> - Using MP run version 13.00 and post components version 10.00 15 Jun 2009 12:15:50 PM - <2> - Initiate opening the post processor file(s). 15 Jun 2009 12:15:50 PM - <2> - Post processor file name: K:SOFWAREX4GENERIC HAAS 3X VMC.PST 15 Jun 2009 12:15:50 PM - <2> - The post processor file has been successfully opened. 15 Jun 2009 12:15:50 PM - <2> - Post version information (input): 15 Jun 2009 12:15:50 PM - <2> - UPDATEPOST Version 13. was used to modify this file. 15 Jun 2009 12:15:50 PM - <2> - The file was modified by this product on 10 Jun 09 15:15:08 15 Jun 2009 12:15:50 PM - <2> - The post was written to run with Mastercam Version 13. 15 Jun 2009 12:15:50 PM - <2> - The post product type is Mill. 15 Jun 2009 12:15:50 PM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful. 15 Jun 2009 12:15:50 PM - <2> - Search for defined post variables, strings, postblocks was successful. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 1. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 1. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 1. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed5$' was re-initialized from 0. to 1. 15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'peckacel$' was re-initialized from 0. to 1. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect. 15 Jun 2009 12:15:51 PM - <2> - Successful completion of posting process!

i'm have same thing this prolem., my post use in x3 year ago, part make noany prolem, but check it in postdebugger, i'm know post have erro prolem.., but nc post came out ok, but use update in x4 they came erro massege green..., and some file miss, can't use post debugger in windows vista....

i'm try update old post or use 4 axis post turn off ques?164 but post nc out come with 1 papper masseges erro...... ,i'm using my old in x3 somany year... it working ok on cnc, but check in postdebegger they have erro...., using that update x4 or new post download in emastercam, turn off 4axis, but it still erro any one have idea post variable 'helix_tol$' was re- initialized c.005 to 0.00001 ............'met_helixtol$'.......0.005 to 0.001 ............ dec_seq_right$'3.to0. rotfeed4$,...rotfeed5$...,irotffe5$...,peckacel$, singel axis use only???>>>> some program or use contour tool

i'm have this prolem too in my shop i'm use x3 and x4 in vista windows,,,,, can't using postdebugger icon post, but try in home xp use x3 working good?,anyone have idea?