OK... so I saved and restarted MC and now it seems the problem is fixed. Much thanks and appreciation.

I checked both these issues but still have the same problem. The code doesn't show any arc moves at all but only linear in three axis.

Happy New Year everyone. Im trying to threadmill but the code spits out as small linear moves and the thread seems to be faceted and not smooth. Is there a way to smooth out the thead and perhaps shorten the code as well. Thanks

Thanks Josh...Exactly what I was looking for..Much appreciated.

you know when you're milling and you change to a different WCS and all the tools and everything switch relative to this new WCS...when I try to do the same on the lathe it seems I create a new WCS but the tools don't seem to change relative to the new WCS. Is there something I'm missing in order to achieve this? Thanks in advance

Where would I find t his option

How would you turn around my part in a lathe and still be able to use stock verify for both ends? Thanks in Advance

When I create surfacing routines I cant find a way to keep the tool down instead of retracting to the clearance level. Thanks in advance

Thats exactly whats happening. The window that pops open is the one for selecting geometry so Im at a stand still

Still the same problem. Before I posted, I also did a clean reinstall and still the same problem. Maybe its a Windows issue?

Until now ;(

According to the system requirements I'm OK. Ive been running this software for abouta year with no problems

Hi..Im running MasterCam 6 and when I open an operation the software flickers to windows desktop briefly and then the pop up window for selecting geometry appears just on the edge of the screen but is not accessible. Any thoughts?

I'm trying to create this surface but with a tighter mesh. Also how do I get my screen to display surfaces in more detail.

How do I create a curved surface in the xz or yz plane that is more smooth without facets.