DODGERFAN
-
Posts
613 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by DODGERFAN
-
Philcott, Dan and justin all have it right. But also make sure your lead in and lead out angles are set properly too,
-
California Jig grinding is about the best iv'e seen. But it's in California.
-
then we have the same post.
-
i'm trying to figure out how to get to my poast so i can e-mail it
-
are you programming a dual turrate lathe?
-
this is what are okuma thread cycle looks like. 2.000 16 thread (MACHINE - OKUMKA CADET/CROWN) (PROGRAM NAME - THREAD EX.NC) (CUSTOMER - ADD CUSTOMER) (PART NUMBER - Machine Group-2) (MODEL # - Machine Group-2.MCX) (PROGRAMMER - ) (DATE - AUG. 10 2010) (TIME - 1:38 PM) (PROGRAM REV - N/C) (*****) N1 ( TOOL - 97 OFFSET - 97 ) ( OD THREAD RIGHT INSERT - NONE ) (*****) G0 X20. Z20. T9797 G97 S200 M03 M41 G0 X2.2 Z.2156 G71 X1.9323 Z-1. B29 D.012 H.0677 M32 M75 F.0625 G0 X20. Z20. M05 M02 %
-
Trust me when i say CRAZY MILL MAN can be trusted. Most trust worthy dude around! GUARANTEED
-
dont forget to check your lead in lead out!
-
if it is a carbide drill with thru coolant, i would NOT peck it at all. if you catch a chip on your return your buying a new drill. like goldorak said make sure your drill is dead streight.
-
GUN DRILL GUN DRILL GUN DRILL!
-
thanks to everyone for the help
-
Does any body know of a cnc grind shop in the orange county ca area?
-
.125 DOC .01 ROUGHING .005 FINISH 90-110 SFM KENNAMETEL SNMG SERIES
-
you can edit the tool and it will always turn the coolant on for you.
-
also make sure tool set up is correct. had same problem 2 wks ago.
-
yes custom ground tools. looks like the mistake was in the program in the lead section. was supposed to be 9 tpi but gave me 10, although i had 9 typed in. thanks for taking a look.
-
hello' having a problem with programming buttress threads, never programmed them before. here is the problem, the customer says the thread gauge goes but the mating part wont go. i am working with the female end of the part. here is the code and i will thank you in advance N6 ( TOOL - 6 OFFSET - 6 ) (ID THREAD - MIN. BUTTRESS) (*****) G0 X20. Z20. T0606 G97 S200 M03 M41 G0 X.0905 Z.2552 G71 X.3988 Z-.2953 B29 D.022 H.1083 M32 M75 F.1 G0 X20. Z20. M01
-
i found some tiny chamfer geo that was jamming me up!. but thanx for the help
-
nope! still buggin.
-
yea! i do the same thing. but this time nothing works!!! even dynamic x form does the same thing it will, however allow me to rotate 90 180 or 270 degrees but anything in between, just wont work. the part i'm working on is a dash number part, we make families of the same shape different features. i can do it no problem in a different file. really weird. thanx
-
i'm trying to rotate a part 68.34 degrees. just a standard rotation i use this every day without any problems. but today it says the range is too large. any ideas what this is? like i said this is a function i use all the time, never seen this before.
-
i'm trying to use a canned cycle for the first time. It's a lathe program, there are a few choices in the canned text options. Any advise on witch option is gonna work the best? The machine will be an okuma crown. Thanx in advance....
-
good tip mr. b
-
WHAT IS THE NEW CURRICULUM LIKE
-
NTMA HAS ADVANCED CLASSES IF YOU HAVE ONE NEAR YOU
