-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Patriot
-
-
These are pictures of me trying one edge at a time and when clicking the largest surface to the smallest. (the one at a time gave me the one with two fillets). Solid Fillet wouldn't work at all. With that I get "Blend creation failed: Blend overflow removes adjacent face ot edge."
Apps Guy: Are you talking about just making a wireframe with what I have?
-
I am trying to fillet the floor to these walls with a .130R that fillet you see on the step of the two walls is .130 as well. When I try to fillet them to the floor, this is the error I get. Is there a way I can do this?? I've only been programming about a year and using this X2.
Sometimes I run into this problem and usually just forget it but I want to learn to do it right. Any suggestions?
-
Oh I see. I've tried that and did just get the lines so i've been trying to get it as a solid. If there's no way with X2MR2, i'll just continue to work around it..
-
Hey, I'm new here and have already learned quite a bit from you all. Here's something i've been wanting to know how to do, or if it's even possible..
Using X2 MR2:
After I verify a position for a part, I know how to save the stl file and use it in other position's verify, but can I save that STL file, or product from the verify, as a solid to import/merge back into the program i'm working on? I would be able to see some fixtures a little more accurately or just the part as a stock for the next position.
Solid Fillet :-/
in Industrial Forum
Posted
YES! That'll work Neil. Even though it rounds off the corner in the radii, it is good enough. Worked good. Thank You!