You can use partial chain to do that.

Be able to use colors in solid faces!

Tell him he can still use the words they are just on the top now!

No we get whatever is drawn! Only one color for solids And surfaces we get any color they draw it in!

My sugestion for the red arrow af doom was to have it not move on its own. Keep it at the bottom unless you move it.

+1000

Yes sometimes you have to click in the ops window to activate it and sometimes you don't,

and that goes for the graphics window also! I do have my ops manager undocked also with dual monitors.

Look at it from the front or side and window to change colors for each depth.

Phil under settings customize use the tab for

drop down / right mouse button menu then you can right click in the left hand side menu it will give you the option to make a drop down menu.

Tom

Phil yes if you just right click on left side menu it will let you do it in setting custom.

There full of sh1t. They both conduct!

Mill 9 should work with that hasp call your reseller.

Randy,

If I understand your problem tou need to make your tip chain deeper so the to don't cut into the first bore [take the top chain and offset it

in and down 10° by 2 deep]

Tom

Set to 1:1 .001 will make it look alot better

htm01 could I get a copy of that also

Thanx

Tom

Jim,

Razor Sharp Grinding in pottostown Pa.

We use x_t. here.

Thank you for the quick reply.

Is there A way to set up your levels and save to file , then ever time you start A job you would just inport the levels so they are always be the same. Thank you

dougm,

Thanks for the info sounds like all I need to

know is it will be more trouble then I need.

Thanks Tom

Peter,

What do you hate about that control, and is it

able to do 3-d for mold work?

Thanks

Tom

Spirit Machinery NY.

They say it only cut plastic, it looks in

good shape.Can it do 3-d.

Tom

[ 07-27-2005, 03:14 PM: Message edited by: t smith ]

We are looking at getting A used one for machining Al. The one we are looking at is A 1995

X 30, Y 20, Z 20, travel, 6000 RPM Spindle 21 tool changer, 10 HP spindle motor. $27,500.

iS It A deal or not.

Thank You for any help.

Tom

Hello all

We have three seats and it is faster at the machine and much better finishes but we only mahine al. We don't see any slower calculating times it is almost always faster.