happytriger2000
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by happytriger2000
-
Operations Manager is showing korean words..
happytriger2000 replied to happytriger2000's topic in Educational Forum
HI, I decided to reinstall the X6, it is now working ok. -
Hi, I'm facing a problem with the language shown in the operation manager in X6, is in Korean. This happened a couple months ago when I updated window 7 and at the end of the update I got Korean Media centre and Korea Messenger Center installed at my desktop. They were both removed sometime after the update, but the korean words were showing in the X6 Operation Manager, how do I solve this? I have tried override the "Resources" folder in C:\Program Files\mcamx6, but this does not help.
-
Adding a new Robot model to Robotmaster
happytriger2000 replied to happytriger2000's topic in Industrial Forum
Hi Tyler, I saved each joint of the KR200-1 stl to individual STL: If I add the XML and .ROBX from another robot folder to the folder above, will I be able to load in Robotmaster? -
Hi, I wanted to add a Kuka KR200-1 to Robotmaster folder: C:\Users\Public\Documents\shared Mcamx6\Robotmaster\Kuka\Robot_Setups, I created a folder "KR200-1" and saved the KR200-1 STL file in that folder, but when I load Robotmaster I do not see this Robot in the Robot selection, what am I missing? thanks,
-
Hi, I will be assembling a new Server workstation, and I would like to know if anyone here has experience with SW(Server Workstation) and what hardware would you recommend best for Mastercam? Currently I have ordered a AMD FirePro V7900 2GB Graphics Choice of Mobo: superMicro H8QGi+-F or superMicro X9DRi-LN4F+ or Asus Z9PE-D8 WS, basically Dual CPU above. thanks,
-
mm...need to change it to English version....
-
Thanks!!
-
Something bothers me, if you look at 2:12, the simulation meant for milling Impeller but why did the "Dome" showed up?, The dome was the previous file I was working on, strange..does any have the answer for that? thanks,
-
-
Solved it!!
-
NCI name, do you refer to this: circled in red? I'm quite new to Mastercam.
-
I'm getting this error prompt n the middle of calculating:
-
Hi, Now that I have set my tooling correctly in Robotmaster, I want to proceed to 5 axis milling, might need some help from you guys, this is my 1st try. Please open attachment for IMPELLER--3 SCALE UP X5.mcx-6. Will make a video clip and upload this as a tutorial for sharing. IMPELLER--3 SCALE UP X5.MCX-6
-
HSD, GC colmbo, Fimec, or cheap chinese Router Here's apicture of HSD ES915A:
-
Robotmaster add tooling to library
happytriger2000 replied to happytriger2000's topic in Industrial Forum
Thanks again Starry69. Will start another post about 5 axis milling on Impeller soon. -
Robotmaster add tooling to library
happytriger2000 replied to happytriger2000's topic in Industrial Forum
Hooray!!, Tool Model finished + Tool added to Robotmaster Tool Lib.: -
Robotmaster add tooling to library
happytriger2000 replied to happytriger2000's topic in Industrial Forum
Thanks, found the tutorial will have a look later, need to finish the tool model 1st. -
Robotmaster add tooling to library
happytriger2000 replied to happytriger2000's topic in Industrial Forum
Hi starry69, Thanks for the link. Yes I will be using HSD MT1120 for my robot, my tooling: -
Hi, I would like to know where can I find info. on how to add tool to the library in Robotmaster Global Setting--->Robot--->Tool? Please open attachment. thanks,
-
I need some suggestions from a VFD expert. If I use an inverter with 400HZ Max. output to drive a spindle of this spec: 10hp, 7.5kw, 3 phase, 380Vac, 12000rpm@400Hz, 22000@800hz, would it spindle turn? or do I need a VFd with 800hz output? Thanks, Freddy