Btetrick59
-
Posts
3 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Btetrick59
-
Thanks Hardmill I wiil do some file comparison with may older post The general setting are different for sure and will check the rest
-
Good morning all I have a simple question about changing a post to add a tool list to the header of my programs, The rep was by last week and helped the mill guy's with a problem and did this for the mill post. So of course I needed it for the Lathes x14 Found the part in gen setting to change this but changing it made things worse of course I did not change the oring.post so back to it I went. Is there a easy # change or do I need to get the book. Thanks Brad
-
Good morning all I have a simple question about changing a post to add a tool list to the header of my programs, The rep was by last week and helped the mill guy's with a problem and did this for the mill post. So of course I needed it for the Lathes x14 Found the part in gen setting to change this but changing it made things worse of course I did not change the oring.post so back to it I went. Is there a easy # change or do I need to get the book. Thanks Brad