i can not get access without user and password

any post guru, please

i need tool numbering with repetition counter added to N number if tool is called again as JParis sugestion above

could anybody shaw me how to create the buffer for tool numbering like N200T2 if tool is #2 and

N201T2 if tool #2 is called second time or N203T2

if called third time, please?

John

would You give me direction how to create buffer,

if i call the tool second or third time, pleas?

try windows virtual pc from microsoft

check if you've got "absolute" in control def -> arc centre

1000

what do you think guys, if this function should be in right click on selected toolpaths, not like it is now on only one selected toolpath parameters?

wireframe-coons is O.K.

270 rpm and 10 ipm feed

oops.., ALT+F1

i use my left hand ALT=F1

yes, 250 finish is 0.00025 in inch

s=0.0194

----

/ = sqare root

--------

s=/ 4*Dt*Hc

s=stepover

Dt=tool dia

Hc=surf. finish in inch

Colin, yes and no; becaouse fixture is parent for stock, all depends where you locate models origin

you can move +2.5 fixture as well

go to cgtechxxxlibrarymazatrol_matrix.sub and in section tool change(called by M06) edit this:

CGTECH_MACRO "ActiveSpindleCompName" "Tool_Spindle"

CGTECH_MACRO "ActiveSpindleOnOff" "" 0

CGTECH_MACRO "ActiveSpindleCompName" "Part_Spindle"

to this:

CGTECH_MACRO "ActiveSpindleCompName" "Spindle"

CGTECH_MACRO "ActiveSpindleOnOff" "" 1

CGTECH_MACRO "ActiveSpindleCompName" "Spindle"

finally i landed with G84 or conversational

thanks

o, i've forgot, programming rigid tapping in conversational is perfect

hi guys, i did not try G99 but G98 or deleting G80 does not work

thak you guys

---------------------------------

So you're trying to peck tap then? Do you always peck tap?

---------------------------------

yes, somtimes i'm pecking, specially with small dia taps and dificult material; guys, tapping G88 it self is O.K. i'm just wasting the time with that jumping to Z home but holes are good

thanks