so, what for is that Metric Checkbox????

guys, change speed and feed on finish passes or on

corner arc movement is the problem for CNC as old as mastercam

set your dynamic to 0-(unlimited) and memory 75%

same problem here

Uppps, I forgot, toolpath manager must be undocked

Ocean, of course I can use Alt+O but, this is not

what I am looking for. I found samthing similar but not exactly. When You go to machine group

properties/files/edit defaults then operation manager is minimized in bottom left corner, so

CNC INC., could You PLS!! put that routine in to backplot and verify function?

do I really have to invest in new hardware

to get functionality that was in MC9??

yes, minimized, but in the way of MC9-automaticaly

when you start backplot

is it posible to have tool manager minimaized

during backplot and verification, and after, back to previous size?? (like in ver MC9??)

Your scale factor is: 1/1.283=0.779423226

hey Matt, say hello to JJ_8

JJ_8, yes, 5 axis machining, if You"ve got operations located on opposite sides, like top

and bottom; becouse mastercam can only create

5 axis toolpath in top orientation.

Gunther, THANK YOU

correction; tool is jumping after finish from retract to feed plane back and next to clearance

O.K. another bug

try this:

1. dock your tool manager and make it approx

3/4 wide of your screen (situation if

you have long comments)

2. select toolpaths to run backplot

3. start backplot and pause after 2-3 sec.

do not exit backplot

4. make your toolpath manager approx 1/8 wide

of your screen

5. try to rotate your model or geometry dynamicly

when selected retract and clearance then tool is

jumping after finish from clearance back to retract and up to clearance

go to control def., NC Output, Enable post debug

info.

Hi

1ft = 120 bytes, so

840 ft = 100800 bytes

do not start from ALT-C;

install icon in toolbar and start from icon

Hi Colin

If You answer this quastion:

why did You change from DOS to windows??

You've got my answer. Graphic is graphic and thats why we've got Mastercam X2

Roger Martin and all of You Guys,

if there is over 1000 pages of post referance,

do'nt You think is time to release graphic,generic

post and just include manual for that, 100 pages??

G43.1 or G43.4 is full 5 axis dinamic

cutter lengh compensation. For 3D programming

You gonna use G43 as normal.

You've got to enter tool gauge to tool register

and thats all.

Do not forget to change pivot point lengh in

Your post to 0. valu, becouse You are programming tool tip.

Hi Jeff

pls specify if You wont to lock program

editing at machine control or edit toolpath

in mastercam file?

i do not know the way, but this is very good

idea, lock toolpath with password

320m = 125984b