Plastmo
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Plastmo
-
i can not get access without user and password
-
any post guru, please
-
i need tool numbering with repetition counter added to N number if tool is called again as JParis sugestion above
-
could anybody shaw me how to create the buffer for tool numbering like N200T2 if tool is #2 and N201T2 if tool #2 is called second time or N203T2 if called third time, please?
-
John would You give me direction how to create buffer, if i call the tool second or third time, pleas?
-
Running old programs on 64 bit computer
Plastmo replied to Todd Mann from Fastech's topic in Industrial Forum
try windows virtual pc from microsoft -
check if you've got "absolute" in control def -> arc centre
-
1000
-
what do you think guys, if this function should be in right click on selected toolpaths, not like it is now on only one selected toolpath parameters?
-
wireframe-coons is O.K.
-
270 rpm and 10 ipm feed
-
oops.., ALT+F1
-
i use my left hand ALT=F1
-
yes, 250 finish is 0.00025 in inch
-
s=0.0194
-
---- / = sqare root
-
-------- s=/ 4*Dt*Hc s=stepover Dt=tool dia Hc=surf. finish in inch
-
Colin, yes and no; becaouse fixture is parent for stock, all depends where you locate models origin
-
you can move +2.5 fixture as well
-
go to cgtechxxxlibrarymazatrol_matrix.sub and in section tool change(called by M06) edit this: CGTECH_MACRO "ActiveSpindleCompName" "Tool_Spindle" CGTECH_MACRO "ActiveSpindleOnOff" "" 0 CGTECH_MACRO "ActiveSpindleCompName" "Part_Spindle" to this: CGTECH_MACRO "ActiveSpindleCompName" "Spindle" CGTECH_MACRO "ActiveSpindleOnOff" "" 1 CGTECH_MACRO "ActiveSpindleCompName" "Spindle"
-
finally i landed with G84 or conversational thanks
-
o, i've forgot, programming rigid tapping in conversational is perfect
-
hi guys, i did not try G99 but G98 or deleting G80 does not work
-
thak you guys
-
--------------------------------- So you're trying to peck tap then? Do you always peck tap? --------------------------------- yes, somtimes i'm pecking, specially with small dia taps and dificult material; guys, tapping G88 it self is O.K. i'm just wasting the time with that jumping to Z home but holes are good thanks