-
Posts
164 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Festus
-
-
-
fillet one edge for solids? is that what you're looking for? fillet to surfaces for surfaces
-
-
Hockey... step file from Pro E. Jparis...I need all surfaces at once. this mold is for a tub surround. there are hundreds of thousands of tiny triangular surfaces? even on flats? Jay i think that answers some of your questions too? My first thought was to check for duplicates as well...none.
-
I have a mold to make and the file the customer sent me has 1193 untrimmed and 324035 trimmed surfaces. my poor 'puter is having a conniption with that!!! any thoughts or ideas on how to shrink the file? 243,360KB
-
I agree with James, good job, BUT are there any plans to use the actual post?
-
my offset is fine on three axis stuff, however as soon as my axis flips sideways it's all messed up. Seems like it is still picking up the offset(Z) for my A axis rotation and is not offsetting at all in X and Y for my tool offset. Any suggestions?
-
I like it!! good job guys!!!
-
Thanks...that did the trick
-
sorry guys..i've re-posted
-
I am trying to import an stl file. After mutiple attemps and letting it work for over an hour I am still getting nothing. What am I doing wrong?
-
i am trying to open an stl file. it seems to try and open it , however after repeated attempts and letting it work for over an hour i am still unable to open it? Am I doing something wrong?
-
10' x 14' 5-axis Onsrud gantry with 41" of Z.
-
in your drill point manager right click and open sort options. are you selecting points or line endpoints? i've had funky things happen with endpoints sometimes?
-
mastercam editor.
-
hmmmm. this is a new one. all my interface capability is gone from my editor? i can't even right click anywhere to get a menu? any ideas?
-
Lot of good ideas, thanks guys.
-
Dan...I messed around with that...i can change angles but i can't get it to follow the edges?
Pip..that will work, except i need to turn tool compensation off and then my edges will vary with resharpened tooling not?
-
I'm sorry I don't think I clarified that i want 5 axis movement. the surface project paths work fine but they are only working in 3 axis
-
i tried the project5 c-hook as well. i can only get that to cut in one direction.
-
Hardmill...i need some more advice. i'm not seeing the option to select the 2d toolpath? sorry for my ignorance
-
Why did I not know that? another one for the forum! thanks Hardmill
-
Is there a way to cut a surface with something similar to say an overlap spiral method rather that zigzag? I am cutting wood so this would be helpful to prevent chipping.
-
I need to turn a photo into a surface. Anyone have artwork and want to make a couple bucks?
too many surfaces!!
in Industrial Forum
Posted
Thanks guys...I had turned the surfaces to a solid in MC, but that only made the file larger... also tries an .iges file and ended up in worse shape that before...Mulin i will try your approach...the problem is the tub surround has tiles with a texture on them. i had the customer send a file with smooth tiles for roughing and then he seperated each tile for me for my finishing? rather tedious, but I think it'll get the job done in the end. and I am in the process of upgrading as well.. see attached..will this work?