I am running windows 2000 and x2. I am trying to bring in a solidworks 2007 file and I am getting the cannot find parasolid data in file. I tried to unregister and reregister dll file. Dos does not reconize regsvr32 command. I also tried using the utility to no avail. I came across someone else running 2000 and he said it would not work for him either. Are there any fixes or do I need to upgrade to xp or vista. Thanks for your help.

I think you right click in the screen where your tool bars. Click the check mark by mru and it you should be able to put it back

Colin I tried the same test as you and it did not work either. Maybe cnc will put this on their things to do list. The only thing is this worked for me until I loaded MR2 I don't know if it a coinindence or not.

I was wondering if anyone is having problems with the dnc portion of predator and comments in the code alarming out when trying to dnc. I am running a haas mill.

no we are not this maybe something with my dnc I don't know though nothing has been changed that I am aware of.

I just sent the same program and loaded it in the hard drive and it work but when I try to dnc the same program it alarms any suggestions. I don't think it Mastercam

sorry about Charles was logged in this computer on another programers name here

These are comments from the toolpath operations no manual entries. This is the first time this has happened.

National Jet corp. in Maryland they run .001 dia wire

I am trying to send a program to my machine and it is alarming because of the comments do not have quotation marks. I have not used MR2 to send programs yet and I am wondering if something has changed with this release. Programs that were created before MR2 post ok. I have went into the post and tried to shorten the comments to the machine to no avail. Any help would be appreciated.

Hardmill the file is on the ftp site under the name hard mill h-13 I and just concerned about the cavitiy detail the shutoff I am going to wire cut Thanks alot for your suggestions

roughing before heat treat Hass mini mill cat 40 holders I know this not the machine but with 1/16 and 1/32 dia endmills I was wondering if is possible

I am considering doing some hard milling of h-13. I have not done much hard milling and am wondering if someone can give me suggestions on speeds and feeds. The cavities I am milling out are fairly detailed and will need to be finish with small endmills 1/32 dia. Any suggestions or help would be appreciated.

Hi John I am importing a fairly detailed model into MCX and there are gaps in the geometry and surfaces. Are these some of the problems you are having if so this makes it difficult to put tool path on it.

Thanks for your help John