Sye Phommachanh
-
Posts
35 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Sye Phommachanh
-
that's what i thought... thanks anyways, gstephens
-
1 more thing...now, how do i analyze in deg/min/sec ?
-
did what you guy(s) said..works find...thanks a lot!
-
do not know if this has been asked? But, does anyone know how to make mcam, output anglur lines as deg/min. rather than deg/dec.?..I know that you can set globals to output this, but that only works with dimensioning, from what i know. now, when mcam prompts you to enter an angle, in(create/line/polar). it reads it as deg/dec. how do i make it read deg/min?. any help is appreciated...using mcam8.1.1
-
you usually get that message,when you use 2 different tool plane,with the same work offsett.just change, your work offsett #.
-
okay...so now what do we do?...?
-
we paid $100 for v7, does this mean we have to pay another $100 for v8?
-
macdac engineering...they tell me that i have to use v7 to open any old dwg file's.
-
i asked my dealer for a code also. they tell me they know nothing of it....i think's it's time to find a new dealer!!
-
?????? never had it crash on me.it just won't convert 'cause it's not 13 or higher.right now i'm opening dwg file's thru v7. kinda stinks.is this an add-on, that's gonna cost $$$...?
-
don't know if this has been asked, yet?Probably has,...but, does anyone know where to get a converter for autocad 12 and under,for v8...my v8 only opens 13 and higher...why is that?..how come it's not standard....hmmmmmm?
-
i believe there is away to modify the pxout & pyout in the post to do this.That's what my mastercam dealer told me.just wondering if anyone has done it , yet?
-
trying to avoid any extra drawing, also.
-
g54 x-.25 y.25 ... g1x0.f25. - unwanted x2. - unwanted x2.25 - want y0. - unwanted y-2. - unwanted y-2.25 - want x2. - unwanted x0. - unwanted x-.25 - want y-2. - unwanted y0. - unwanted y.25 - want...etc. i'm using a yasnac pst.
-
Please post here if you are new to the Forum
Sye Phommachanh replied to Webby's topic in Industrial Forum
hi, I'm in my 4th yr using mastercam, and i work in a boring job shop....Someone give me some 3d work... -
well i want to use the lead-in/lead-out.I just don't want to post unwanted lines.
-
does anyone no how to modify a pst file, so that the post, does not post, the lead-in/lead-out lines?would only like to see the final x & y moves without, the extra lines.trying to save memory space in the machines.plus set-ups will go a lot faster. any help is appreciated.
-
pst rounds off feed rate for tapping
Sye Phommachanh replied to Sye Phommachanh's topic in Industrial Forum
Hey Thanks for your help. Did what you said and it worked. Thanks again. -
i'm running v8.1...my problem is. after i post my nci files. (tapping only). my post rounds off my feed rate. how can i fix this problem?.. it's not a problem changing manually, but don't want someone else to forget to do so.
-
how do i enter the amount of reps, so that my post outputs, L's and not work offsets, kinda like: M98 P1324 L5, not M98 P1324 g54, etc. running v8.1 w/ yasnac80 post.
-
Hey Thanks! I did what you said and it worked out find!...again Thanks a lot.
-
Anyone know anyting, about, end of character codes? example: lf/cr = 10,13...to get % in program. what is lf/nl = ? does anyone know? can anyone help?... we've just installed a dnc system. i could send to my machine, but when i send back. i receive some funky codes. doesnt even loof like codes. someone told me i had to adjust this parameter to my machine, which is a mycenter w/ I=80 controls.figure i ask you guys first....codes up top are for a OM and Ot fanuc controls.
-
Thanks trevor, It worked.
-
The actual message is... Warning - Simulate cutter comp in control stopped at entity #4 of #9(not always these #).This is also where the control will stop.Check for arcs with radius less than or equal to the tool radius and for perpendicular antry/exit lines.Check q.160 in the pst.file..... Have you ever encounter this message?or has anyone?...this message prevents my file from verifying properly.Even though it back******fine.
-
I'm running ver8. I also had the same problem with vers7.Never knew how to fix it.