myrock
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by myrock
-
-
Hi Guys,
We have a Star SR20II Swiss machine 18i Fanuc control. we're using USB to load program into machine. it's able to extend program in Head 1 but it can't extend program by using M198P**** in Head 2 of Sub spindle? Is there any parameter setting?
Would you please help?
-
Do I need to cancel after turned it on at the of program with G50 C ???. What's the C axis in absolute or incremental?
-
Those toolpaths don't have compensation direction option, which mean left or right cutting path. I only do computer, and don't do cutter comp.
-
Morph between 2 curves, paralell to surf, or swarf milling don't have compensation direction option. Therefore, they could not comp left or right. I don't want to redraw surfaces or offset wireframes.
-
Would you please give ideas how to create simultaneous multiaxis paths for this part and don't use 3+2 multiaxis indexing paths.
Thanks,
-
Hi Cjep,
Is it possible to create shortcut and place it on desktop of computer.
-
Hi Colin,
is it on the mastercam website?
-
Thank you for reply Dandle D.
If I do the math as you show me.
The line move distance is about feed/distance 1.0487-.3646 =.6841
Then 115/6841=168.1 but the post only F=2.83
Is this number is set correct?
pri_limlo$ : -99999
pri_inthi$ : 99999
-
Could you help me to modified my Haas 5 axis post to get inverse feedrate right
# Post Name : Generic Haas VF-TR_Series 5X Mill
# Executable : MP 14.0
use_fr : 3 #Output feedrate
inv_sec : 3 #Inverse feedrate is in seconds
maxfrinv : 9999.99 #Limit for feed inverse time
#Rotary axis travel limits, always in terms of normal angle output
#Set the absolute angles for axis travel on primary
pri_limlo$ : -99999
pri_limhi$ : 99999
#Set intermediate angle, in limits, for post to reposition machine
pri_intlo$ : -99999
pri_inthi$ : 99999
Using Swarf milling toolpath – .25dia carbide E/M – S7500 - F115.0 - Aluminum 6061
G94 X1.098 Y-2.3342 Z5.1549 F115.
X1.0953 Y-2.3246 Z5.1486
X1.0908 Y-2.3157 Z5.1422
X1.0846 Y-2.3078 Z5.1358
X1.0769 Y-2.3014 Z5.1295
X1.0682 Y-2.2966 Z5.1231
X1.0586 Y-2.2937 Z5.1167
X1.0487 Y-2.2924 Z5.1104
G93 X.3646 Y-2.2985 Z5.1081 B1.028 A19.997 F2.83------------------TOO SLOW
X.3549 Y-2.2948 Z5.1095 B.388 A19.996 F133.79
X.3402 Y-2.2976 Z5.1087 B.961 A19.987 F181.67
X.3177 Y-2.3049 Z5.1062 B2.605 A19.967 F181.52
X.3095 Y-2.3028 Z5.1071 B2.281 A19.959 F181.61
X.3024 Y-2.3008 Z5.108 B1.813 A19.957 F181.5
X.2729 Y-2.3067 Z5.1065 B3.847 A19.909 F132.77
Star SR20II fanuc 18i Swiss machine
in Industrial Forum
Posted
Hi,
We have a Star SR20II Swiss machine. We're using a USB to load and save program. It's only extend in Head 1, but it can't extend program in Head 2 of sub spindle by using M198P****.
Is there any setting in parameter?
would you please help?
Thanks,