On 2/10/2019 at 11:49 AM, Günther Massimo - GMCCS said:

For testing.

http://gmccs.de/downloads/SetupX%2B_2020_beta_1.zip

Have a nice day

is this still available?

X+ is available for download for Mastercam 2018

http://gmccs.de/downloads_x+.php

thank you everybody for your help,i will try that jp ,thanks.

I might can help you out tomorrow morning if I can squeeze it in

i would appeciate any help, thank you

josh,

is there any way you could alter the file i put on there and give me a example, i would be grateful if you could help me out.

We currently have a dmg dmu 5th axis and every time i do a 5th axis routine , any walls that have no curvature to them have gouges in them.

I am currently new to 5 axis machining, i was wondering if anybody could take a look at my parameters and see something im not,any help would be appreciated. (had to increase the step down to .025 to  shrink the file size, had it at .01 step down)

Thanks

1ST-FINISH-OP.mcx-9

DOES ANYBODY KNOW IF THEY GOT RID OF THE DRAG FEATURE IN THE XFORM MENU, CANT SEEM TO FIND IT

just go in your post and look for this setting

can you tumble it?

You can try splitting your nci file to sections that your machine can handle.

sweet, good luck with it

where in texas? im in SA

hey baddawg,

im currently looking to move to texas and i will be looking for a job there.

i currently hav 15 yrs ex in mastercam and i know how to read g-code been programming for 20 yrs.

i program a number of machines including mazaks and i know 4th axis and 5th axis as well, are you guys hiring?

i also meant verisurf, not vericut --sorry

try vericut for x6 it will auto create vector line for you

it is an amorphous material, care needs to be taken if machined with coolant. If used, non aromatic coolants should be used to avoid crazing.

and i would use diamond tooling with a high polish, ive had good results with those.

put a taper wall in your cutting parameters to match your tool

We have been licensed for over 6 years now and we just caught an employee with a illegal seat on his computer, we terminated him and removed the illegal seat, but when we try to load the legal version it still comes up a full blow version which we are not licensed for, how do you remove this?

we have a mazak and we had to puchase the high speed , i had the same problem with it cutting corners and the high speed package fixed that.

as for your haas there is a g code that you must use along with a p code.

Restarting mx worked thanks to all that replied.

I notice in the level manager you cant right click and purge empty level anymore, has anybody else had this problem.

most problems i encountered with the new verify have been operator error! just saying

bull crap

i have the same problem with finish and roughing and finish.

the adjustment for acc and dec are in your machine param.

Does anyone use this mode? Reason I ask is I have come across something that I think might either be a bug or perhaps its supposed to be this way but if you try to use this mode with wear compensation, it seems to ignore it. Basically I am trying to finish around a block and I am using high speed machining but on the corner I need it to slow down slightly, hence why I want to use Mastercam's high feed option. However when I select it with wear compensation, it tells me the program time will be reduced to 0min 0 secs. What its doing is using the parameters feed entered but doesn't adjust on the corners. Does anyone else know about this?

im having the same problem but i get a message at the bottom left coner stating -----"cutter compensation in control: left, feed rate not adjusted"

its seems to have been resolved with sp2