sorry i just saw that I left off the *

it is working now.

BTW what dose the * do?

ok so it dose work sort of...

say I have three tool path with 3 different Tools

all with misc. integer set to 10

it will post :

N1590 #[600+#4120]=10

N1600 M98P7000

on the first tool and

on the next two

N1590 #[600+#4120]=

N1600 M98P7000

this only happens if the misc integer is the same amount as a tool before it.

But if the are set

T1 misc. integer 10

T2 misc. integer 5

T3 misc. integer 10

it post with no issuse

how do I fix this?

Thank you,

awesome! it worked great! thank you for all the help

ok that work to get the right amount but now

it post

N490 #[600+#4120]= sav_mi3 5.

N500 M98P7000

how can I make it post out just the number?

Hi,

I am having issues with the use of a misc. integer in my post.

what I need to do is add a

N1590 #[600+#4120]=XXX (xxx = misc.integer 3 amount set in tool path)

N1600 M98P7000

at the end of the tool before the next tool.

I think I have almost got it but when i post is is out putting the integer amount set for the next tool not the current one. and it post no amount on the late tool ext:

N1590 #[600+#4120]= (Should be misc. integer amount set in tool path)

N1600 M98P7000

This is what I have done

sav_mi3 : 0

fmt "" 4 mi3$

In the pretract #End of tool path, toolchange i added

sav_mi3 = mi3$

if mi3$ >=1, ## Daniel

[

pbld, n$, "#[600+#4120]=",mi3$, e$ ## Daniel

pbld, n$, "M98P7000", e$ ## Daniel

]

Please help

Thank you,

I have a very simple part on the 4th Axis that has slots on the top front bottom and back.

If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error

RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect.

but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error.

Please Help.

Thank you,

I have a very simple part on the 4th Axis that has slots on the top front bottom and back.

If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error

RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect.

but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error.

Please Help.

Thank you,

I teach MasterCam for NTMA Training center. I am looking for some extra Prints that I can hand out in my class to slow down some of the better students. Any help would be grate.

Thank you,