Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
ok so it dose work sort of...
say I have three tool path with 3 different Tools
all with misc. integer set to 10
it will post :
N1590 #[600+#4120]=10
N1600 M98P7000
on the first tool and
on the next two
N1590 #[600+#4120]=
N1600 M98P7000
this only happens if the misc integer is the same amount as a tool before it.
But if the are set
T1 misc. integer 10
T2 misc. integer 5
T3 misc. integer 10
it post with no issuse
how do I fix this?
Thank you,
Hi,
I am having issues with the use of a misc. integer in my post.
what I need to do is add a
N1590 #[600+#4120]=XXX (xxx = misc.integer 3 amount set in tool path)
N1600 M98P7000
at the end of the tool before the next tool.
I think I have almost got it but when i post is is out putting the integer amount set for the next tool not the current one. and it post no amount on the late tool ext:
N1590 #[600+#4120]= (Should be misc. integer amount set in tool path)
N1600 M98P7000
This is what I have done
sav_mi3 : 0
fmt "" 4 mi3$
In the pretract #End of tool path, toolchange i added
sav_mi3 = mi3$
if mi3$ >=1, ## Daniel
[
pbld, n$, "#[600+#4120]=",mi3$, e$ ## Daniel
pbld, n$, "M98P7000", e$ ## Daniel
]
Please help
Thank you,
I have a very simple part on the 4th Axis that has slots on the top front bottom and back.
If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error
RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect.
but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error.
Please Help.
Thank you,
I have a very simple part on the 4th Axis that has slots on the top front bottom and back.
If I Pocket the top slot and rotate it around it post fine. but if I do the same tool path on the Top front Bottom and Back keeping the wcs the same ans change the T and C plane for each on I get this error
RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect.
but on when I use the Back T and C plan if I create a new plan in the same spot as the Back and name it Alt Back it will post with no Error.
Please Help.
Thank you,
I teach MasterCam for NTMA Training center. I am looking for some extra Prints that I can hand out in my class to slow down some of the better students. Any help would be grate.
Thank you,
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.