Hi, thanks in advance,

I need to know what type turrent an Okuma lb-15 has and if anyone has the specs on tool attachment, turrent max swing with what height tools, etc.

Phil

Hi, thanks in advance,

I need to know what type turrent an Okuma lb-15 has and if anyone has the specs on tool attachment, turrent max swing with what height tools, etc.

Phil

Are you sure the backplot moves are not Geo now see if you can pick it..

No Jay they are not geo and they stay on all level.

I can't figure out what I before,I had recorded the driver # before reformating

and the # was for 64bit xp and I have 32bit?

I had to reformate my m90 drive and lost my video driver for fx-3500m card.

I have tried a handful from dell and solidworks sites.

Mastercam is what causing problems with back plot.

It leaves all the back plot moves and they stay,through restart,repaint,ram saver,etc.

My hope is someone has a driver # thats works for them.

Thanks,

look for this in the post

 

# --------------------------------------------------------------------------
# Primary axis lock/unlock
spunlock : "M13"     #Unlock Rotary Table
splock   : "M12"     #Lock Rotary Table    
s_plock  : ""        #Target string

fstrsel spunlock p_lock s_plock 2 -1
# --------------------------------------------------------------------------
# Secondary axis lock/unlock
ssunlock : "M11"     #Unlock Rotary Table
sslock   : "M10"     #Lock Rotary Table    
s_slock  : ""        #Target string

fstrsel ssunlock s_lock s_slock 2 -1
# --------------------------------------------------------------------------

Thanks I changed the #'s and it looks good

I searched but no luck

Need to change the number of code that locks and unlocks brabe on 4/5 axis table

using the haas 5axis post supplied with Mastercam.

Thanks

Try Here...

 

# --------------------------------------------------------------------------
# 5 Axis Rotary Settings
# --------------------------------------------------------------------------
#Assign axis address
str_pri_axis : "B"             	<<<<<<<<<<<<<<<change this to "C"
str_sec_axis : "A"
str_dum_axis : "C"

thanks that worked

I am using the haas 5axes post and need to have a C instead of a B output,the numbers are correct just the letter is wrong.

Hope there is a way to do this.

Thanks,

does it pop up when you start a line command.

I've undocked mine and it's not visible until it's needed

no not anymore thats what gone missing.

seem to have lost the box that let you input xlength and y length with rec and lines.

tryed turning all tool bar not it.

thanks for your help

Anybody know where to buy steel vdi50 plugs in the US, Somebody that stocks them.

Thanks

Anybody know of a good source for cad files of std lathe tools

Thanks

anybody know if this control on a fadal with drive 5axes

Thanks

Anybody know a way to get red of tool planes and views left over when you go a save some from a file with loads of tp and views?

Thanks in advance

Would anybody share a small amout of code that drives a touch probe in a fadal

I am trying to do this but can't get any 232 output.

In manual it seem simple.

Any help would be great,thanks

So Scott, this a complete cable and not the adapter that comes with card?

Ron, do you have a direct link to this.

Don't see it named this for down load on Verisurf site.

Thanks!

Phil

wonder whats going on,sure would like to use the fx580

looks like pny tech support would know something

single display is not a problem its when you try 2 displays

Chris, are you using the dvi and one display port with the adapter they supply?

I wonder if I should try a 3rd card.

Thanks

Sorry for repeat, didn't see first repley post

But yes both displays work on the dvi port

I have a pci-e 2.0 X16 board

You could tell that the display on the display port never showed any input.

Like to here from anybody using X4 MU3 to program a 5axes vertical with B axes being the head + or -

90 degrees and C axes is a rotary table mounted on table. machine in question is a Hurco

looks tricky

Thanks,

I have a pci-e 2.0 X16 slot

Only the dvi port had any output,so either of my displays would work on the dvi.

I tryed every combo I could but still black screen and the light on the display stayed the same as when the comp is off.

PNY sent a new adpter first and then another board and we worked on everything they could think of.

What else could it be ga-ma785pmt-ud2h board

Have been using the 2 displays already on a geforse 6800 gt

Hope someone knows how to fix.

Tryied 2 of these card just a few weeks ago.

Could NOT get 2 displays to work,spent some time on the phone with tec help but no luck

They sent news adp for display to dvi still not working

Replace with another new card same deal

Tryed drives

finally had to give up