phil darcy
-
Posts
116 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by phil darcy
-
Hi, thanks in advance, I need to know what type turrent an Okuma lb-15 has and if anyone has the specs on tool attachment, turrent max swing with what height tools, etc. Phil
-
Hi, thanks in advance, I need to know what type turrent an Okuma lb-15 has and if anyone has the specs on tool attachment, turrent max swing with what height tools, etc. Phil
-
No Jay they are not geo and they stay on all level. I can't figure out what I before,I had recorded the driver # before reformating and the # was for 64bit xp and I have 32bit?
-
I had to reformate my m90 drive and lost my video driver for fx-3500m card. I have tried a handful from dell and solidworks sites. Mastercam is what causing problems with back plot. It leaves all the back plot moves and they stay,through restart,repaint,ram saver,etc. My hope is someone has a driver # thats works for them. Thanks,
-
Thanks I changed the #'s and it looks good
-
I searched but no luck Need to change the number of code that locks and unlocks brabe on 4/5 axis table using the haas 5axis post supplied with Mastercam. Thanks
-
replace B output with C, hass
phil darcy replied to phil darcy's topic in Post Processor Development Forum
thanks that worked -
I am using the haas 5axes post and need to have a C instead of a B output,the numbers are correct just the letter is wrong. Hope there is a way to do this. Thanks,
-
no not anymore thats what gone missing.
-
seem to have lost the box that let you input xlength and y length with rec and lines. tryed turning all tool bar not it. thanks for your help
-
Anybody know where to buy steel vdi50 plugs in the US, Somebody that stocks them. Thanks
-
Anybody know of a good source for cad files of std lathe tools Thanks
-
anybody know if this control on a fadal with drive 5axes Thanks
-
Anybody know a way to get red of tool planes and views left over when you go a save some from a file with loads of tp and views? Thanks in advance
-
Would anybody share a small amout of code that drives a touch probe in a fadal I am trying to do this but can't get any 232 output. In manual it seem simple. Any help would be great,thanks
-
So Scott, this a complete cable and not the adapter that comes with card?
-
Ron, do you have a direct link to this. Don't see it named this for down load on Verisurf site. Thanks! Phil
-
wonder whats going on,sure would like to use the fx580 looks like pny tech support would know something
-
single display is not a problem its when you try 2 displays
-
Chris, are you using the dvi and one display port with the adapter they supply? I wonder if I should try a 3rd card. Thanks
-
Sorry for repeat, didn't see first repley post But yes both displays work on the dvi port
-
I have a pci-e 2.0 X16 board You could tell that the display on the display port never showed any input.
-
Like to here from anybody using X4 MU3 to program a 5axes vertical with B axes being the head + or - 90 degrees and C axes is a rotary table mounted on table. machine in question is a Hurco looks tricky Thanks,
-
I have a pci-e 2.0 X16 slot Only the dvi port had any output,so either of my displays would work on the dvi. I tryed every combo I could but still black screen and the light on the display stayed the same as when the comp is off. PNY sent a new adpter first and then another board and we worked on everything they could think of. What else could it be ga-ma785pmt-ud2h board Have been using the 2 displays already on a geforse 6800 gt Hope someone knows how to fix.
-
Tryied 2 of these card just a few weeks ago. Could NOT get 2 displays to work,spent some time on the phone with tec help but no luck They sent news adp for display to dvi still not working Replace with another new card same deal Tryed drives finally had to give up