GS
-
Posts
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by GS
-
Gview=front WCS=top T/Cplane=front
-
cplane=tplane=gview
-
I have 2 lines forming a 0.3 deg. angle When I analyze the angle I get 0 deg. Does anybody know where is the problem? Greg
-
Thank you Thad, In my case the entities are physically moved from their location.
-
I was working in a file trying to print an iso view of the part, it wasn’t coming clean, so I saved the file & exit mastercam. When I open again the file a lot of entities are moved (it looks like 2 rotations) from original position. I am using WCS extensively and this was very unstable in v.9, on large files I was getting tons of crashes. Very often I get all or some operations dirty without doing anything. Has someone else experienced this?
-
I have my WCS saved ASSY#1 and GSFRONT is the front view relative to ASSY#1. I have importated the geometry, using WCS only to orient the part for a new setup.
-
In X I save front view (relative to WCS) with a name, say GSFRONT, then I go to the bottom of the screen and change T/Cplane to GSFRONT. After this screen shows: T/Cplane GSFRONT (Not Saved) Why "Not Saved" when is saved? Also in an operation, Parameters, Planes... , the check box "Display relative to WCS" when is checked the planes shown are not relative to WCS