krl1t0z
-
Posts
6 -
Joined
-
Last visited
krl1t0z's Achievements
Newbie (1/14)
0
Reputation
-
krl1t0z changed their profile photo -
pls help me http://www.emastercam.com/board/index.php?showtopic=76644
-
NEED TO WORK COPY THIS CODE AFTER G54 ... AND PASTE AFTER G81
-
I use master x2, copy the codes need to read the first line. NEED A PERMANENT SOLUTION ty=) -------------------------------------------------------------------------- example NO COPY( x-11.12y.749) = not read the first line -------------------------------------------------------------------- (PROGRAM NAME - T ) (DATE=DD-MM-YY - 21-02-14 TIME=HH:MM - 16:25 ) N100 G21 N102 G0 G17 G40 G49 G80 G90 ( TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 10. ) N104 T1 M6 N106 G0 G90 G54 X-11.12 Y.749 S2291 M3 N108 G43 H1 Z10. N110 G99 G81 Z-20. R10. F549.8 N112 X-3.803 Y-.461 N114 X3.111 Y-2.593 N116 G80 N118 M5 N120 G91 G28 Z0. N122 M30 -------------------------------------------------------------------- example copy ( x-11.12y.749) = functioning ------------------------------------------------------------------- (PROGRAM NAME - T ) (DATE=DD-MM-YY - 21-02-14 TIME=HH:MM - 16:25 ) N100 G21 N102 G0 G17 G40 G49 G80 G90 ( TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 10. ) N104 T1 M6 N106 G0 G90 G54 X-11.12 Y.749 S2291 M3 N108 G43 H1 Z10. N110 G99 G81 X-11.12 Y.749 Z-20. R10. F549.8 N112 X-3.803 Y-.461 N114 X3.111 Y-2.593 N116 G80 N118 M5 N120 G91 G28 Z0. N122 M30 ----------------------------------------------------------------------
-
m01 tool change help me! post v 10.0 MASTERCAM
krl1t0z replied to krl1t0z's topic in Post Processor Development Forum
need erase M01 "tool change" -
need not stop you do not leave the M01 ------------------------------------------------------------------ ptlchg$ #Tool change pcuttype toolchng = one if mi1$ = one, #Work coordinate system [ pfbld, n$, *sg28ref, "X0.", "Y0.", e$ pfbld, n$, "G92", *xh$, *yh$, *zh$, e$ ] pbld, n$, "M01", e$ pcom_moveb c_mmlt$ #Multiple tool subprogram call ptoolcomment comment$ pcan result = newfs(15, feed) #Reset the output format for 'feed' pbld, n$, *t$, "M6", e$
-
I have the same problem (MP v10.0) ---------------------------------- ptlchg $ # Tool change pcuttype toolchng = one if e1 $ = one, # Work coordinate system [ pfbld, n $, * sg28ref, "X0.", "Y0.", e $ pfbld, n $, "G92", * xh $, $ h *, * zh $, e $ ] PBLD, n $, "M01", e $ pcom_moveb c_mmlt $ # Multiple tool subprogram call ptoolcomment $ comment pcan result = newfs (15, feed) # Reset the output format for 'feed' PBLD, n $, * t $, "M6", e $