We can hardly wait to get a hold of you down here. As Bubba say's "Barefoot doesn't have customers, we have friends", I guess that means we'll be getting another friend. I look forward to meeting you. And remember that when you buy Bubba lunch, it's sweet Tea and a biggggg Cheeseburger!!!

I didn't read all the replys to this post, but here goes anyway. I use Ver. 9.1 Level Three for 5-Axis machining and with the Microsoft TracBall mouse I have been able to program all five buttons to control various functions of MasterCam. Especially the scroll wheel. It zooms in and out without programming. If you right click and engaged pan, zoom or spin you can do two commands at the same time with the ball and the scroll. As a second reply to another topic. Think outside the box. Just because MasterCam has certain defaults doesn't mean you have to keep it that way. The "F" keys are the best example. With one key you can do what takes several clicks of the mouse. Examples are; Autosave, Translate Operations, Drill 5-Axis, etc. I stay away from the Alt-whatevers because it takes my hand away from my mouse. Hope this is a help to someone.