Thank you for the help, John.

Can a computer have both a fully functioning dongle enabled version of Mastercam X6 and Home Edition of Mastercam X6 installed? I would rather not take the dongle home and possibly lose it.

88Matt, Don't you have to set the z height using a 1" Jo block to the z0.0 level of the top of the table? Each wire guide should have a distance from the inclination point to the tip of the guide to add to the calculations. Your machine maybe similar. It was very much the same for our Japax wire machine. I used to do taper cuts a couple times a month and I under how frustrating setting the machine up could be.

Thank you guys, I think I have a better Idea of what to look for now. I just realized the program sample up top has a G94 instead of a G93. I made a change in the Control Def. Manager to output inverse feed on the rotary, but its still posting out G94's. Would this be the trouble?

I’m doing some 4th axis program which I don’t normally do and I have two questions about a Haas HRT210 4axis programming. Number one is how do I get the 4th axis to product smooth fluid motion without it having to constantly clamp and unclamp the brake, which breaks up the tool path for combination of one single axis motion and a radius. Number two: posting out a program results in the radius (X-axis & A-axis) moves always having very large values for feed. The only way I was about to get by was to set the tool with a feed rate of F1 and all the excessive feed rates would not post and would only get F1 In the correct place. I would later go in to the text program and do a control-H and change the F1 values to the proper feed rate. Sample below. Thank you in advance. Sample program with excessive feed rate in radius motion: N14 T1 M06 (ACCU_3/16DX5/8LOC_3FLT_ZRN) N16 G17 N18 G00 G90 G54 A150.11 S6500 M03 N20 X-3.4677 Y0. N22 G43 H1 Z3.7055 N24 M08 N26 Z2.8055 N28 G94 G01 Z2.5995 F20. N30 A151.118 F859.602 N32 X-3.618 F39. N34 X-3.649 A150.847 F316.592 N36 X-3.6807 A150.614 F271.82 N38 X-3.649 A150.381 N40 X-3.618 A150.11 F317.254 N42 X-3.4677 F39. N44 X-3.4305 A149.322 F595.547 N46 A151.906 F859.602 N48 X-3.6261 F39. N50 X-3.6627 A151.58 F322.273 N52 X-3.7002 A151.311 F265.651 N54 X-3.7386 A151.101 F207.283 Sample program using F1 as feed rate: N14 T1 M06 (ACCU_3/16DX5/8LOC_3FLT_ZRN) N16 G17 N18 G00 G90 G54 A150.11 S6500 M03 N20 X-3.4677 Y0. N22 G43 H1 Z3.7055 N24 M08 N26 Z2.8055 N28 G94 G01 Z2.5995 F20. N30 A151.118 N32 X-3.618 F1. N34 X-3.649 A150.847 N36 X-3.6807 A150.614 N38 X-3.649 A150.381 N40 X-3.618 A150.11 N42 X-3.4677 N44 X-3.4305 A149.322 F15.27 N46 A151.906 N48 X-3.6261 F1. N50 X-3.6627 A151.58 N52 X-3.7002 A151.311 N54 X-3.7386 A151.101