Are you using city water or well water??? We have a huge issue using hardened well water. (softened well water does not work) We have to wipe everything down at the end of the job. We plan to haul in city water soon just for this reason.

Thank you, Not sure why we have to do this now, but, as long as we can work with it. Have a great week

unfortunately we are still using MR1 at the moment. Our one computer had MR2 but was causing problems so we uninstalled it untill MR2 comes for the rest of them. Hopefully in the next week. Soo, anyone who has advice on how to change this setting with MR1, would be greatly appreciated.

You guys are the best as usual. Now, why or how do they get created under different NC names?

Hi Gang, Can't figure this out. Each seat we have is doing this now. I have reinstalled X with no updates (used to work this way). There must be a setting somewhere. Using MX mill. MC is posting each toolpath operation as a different program. Need help ASAP! Thanks in advance

Thanks for all the support, Bye for now, Georgette

Thank you everyone, Georgette

(I tried a search, but failed) The undo button only allows 1 undo, can this be changed?? thanks Georgette

So then my next question is.. Mastercam cannot generate a drawing from a post? For some strange reason I thought it could. Georgette

Hi gang, I am still new at mastercam, I will search the old posts but I do not know what to search under, this is where I need your help. What do you call it when... I create a drawing and toolpaths, and post, then I want to edit my post (maybe feeds or speed and such, this may be as I am running the program I make the changes) I want to import the post back to my drawing file so any updates I make to the drawing the post still remains current. Does this make sense?? and is this possible?? Thanks a bunch Georgette

Could you tell me how to do a search in this forum? ex. history for "sequential numbering". TIA Georgette

Hi again all, We are trying this for our Haas Super MiniMill, it does do the sequential #ing, but there is other text and various lines that we are drawing in MasterCam and was hoping to find the solution within Mcam. I am in Winterpeg, yup, in the CancerCare Mb Medical devices machine shop. Thanks Georgette

Hello all, I am new to this forum, and we are fairly new to mastercam. Here is our problem. We need to sequentially number parts. How can we automatically run this within the program?