Fred from Université de Sherbrooke
-
Posts
394 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Fred from Université de Sherbrooke
-
-
Is it possible to blank a stock model or make it invisible?
-
What should I see as a difference between a SSD and a hdd?
toolpath calculation? file loading?
-
Ok thank's
So it's better to install the OS on the SSD to get better results?
Fred
-
I have a new computer with a standard disc drive and a solid state drive.
Should I install Mastercam directly on the solid state drive? Need your thought.
Thank's
-
You should take a look at Harvey tools, they should have what you want.
-
Ok, I start.
I can't live without the white text and black background color.
-
It depend on what you plan to do with the machine. I've a little Tormach cnc mill that do a really good job for prototype. It'll cost you a fraction of a retrofit.
-
Thank you all. I was looking for 2-56 so it should give me more suppliers to look at.
-
Just curious to know which thread mill supplier you're using for mini thread mill tools? I know Harvey tools but any other alternatives?
-
ok thank's
I was looking for a chuck, not drills. I sometime need to drill .010" holes as deep as .75" and those drills with 1/8 shanks are pretty limited in depth.
I was using a Albrecht drill chuck but now he is dead, I need a new one.
-
Hello Micro-drillers...
I'm looking for a very small drill chuck to hold drill bits as small as .007"
Any suggestions?
-
Just curious, what parts are done with Lexan on a MTB?
-
Same for me. Close mc, the re-open it and it works.
-
Ok, thank's for the input.
-
Just curious to know what most people are using to boost their spindle speeds. I've been looking at a NSK air spindle (probably model SMS401) but would like to have some feedbacks, others products, ... thank's.
-
ok thank's
-
Can someone tell me what is the X4 mastercam version number... 13.0.3.....?
Thank's
-
I think you're right. Need access code. You'll need to wait for X4...coming very soon...
I can tell you that Dynamic pocket really rock's!
-
You could try the 2D high speed CORE toolpath for this... works very well.
-
Does your break through option is used?
-
that's what I was thinking. Thank's
-
Just wonder how to use more than one tab on a 4x wirepath? On a 2D wirepath it's not a problem but on a 4x wirepath there's no options for this.
-
Eric, you've got mail...
-
For my part, I broke your spline near to where your toolpath pulled off. No problem at all.
X6 stock model (how to make it invisible)
in Industrial Forum
Posted
Thank's