snowman
-
Posts
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by snowman
-
-
I just received a 256MB .stl file from a new customer. This file is to large to open in X5 so I searched and found this post, and downloaded the
easy fit software. I try to open the file in easy fit and I get a to little memory error. Any suggestions?
-
Thanks for the reply I will
see if I can make this work for me.
-
I have a hmc with a fanuc series
15-m controller on it. I am looking
for a way to monitor cutting times
over different periods is there
a actual feed or spindle on timer
that could be reset and monitored?
-
-
11) one big red easy button
-
I just played around with it
Its a setting in your post
code:use_frst_wcs: no$ #Use only the first WCS read and ignore all others in NCI
make sure this says no
-
check lock on first wcs under misc values
0=no
1=yes
-
space bar works for fast point also
-
Allen I have update cplane and tplane when changing
view checked and reset cplane to top in iso view
unchecked. Also when I rotate around the x or y
every thing works normally its just rotating
around z I have a problem with.
-
That works john316 but as soon as you spin
your gview and then try to set your gview
back = to your tc plane it screw your view
and tc planes up.
-
any time I rotate around gview about the z
name and save this view and make it active
I can not get the tc planes to update automatically. and then when I set planes =
to gview they wont stick. Is there a
setting that Im missing?
using xmr1
[ 02-24-2006, 03:06 PM: Message edited by: snowman ]
-
quote:scary
Dont forget who taught me.
-
Greg,
check your mail.
-
I just changed one of my mazaks
parameters with a m32 control to
run the mazatrol library. I changed
f92 and f93 to this.
f92 10101000
f93 00001000
You may want to try to stage a tool
to see if this helps your tool changing
problem
code:105
(DATE - 22-02-06 TIME - 10:25)N25G20G0G40G80G90G94G98G0G28G91Z0.G0G28X0.Y0.(1-1/2" APFT TOOL - 25 DIA. OFF. - 25 LEN. - 25 DIA. - 1.)(ROUGH ID)T25M6T30G0G54G90X3.6667Y0.S100M3If you want a can send you a program
to look at.
-
Is anyone else having problems with
simulating cutter comp in verify
gouging cutting corners etc.
im using mr1
-
I just mouse click in the window I
want to make it active
-
quote:I always open the machine def and edit the control def through there.
Just tried it work like a champ. thanks storkman
I owe you a cold one
-
I got it working but i have to
swith to a different machine def
and then back to get it work.
-
Since mr1 cant seem to get post debugging
information to work. Ive gone into
the control definition under nc output
and checked it on. Anybodey else seen this?
-
-
How would i change my post to output
m84 for airblast off and m89 for spindle coolant
off. right now it puts in m9 for everything.
Im using mphaas post
-
quote:hey snow, did you try the other post??
hey wes im using the mphaas_vf8_0.pst
we had but. but its a modified fanuc 5 axis post.
buy the way how you been bud.
-
quote:have you checked this section of your post to see if the switch you need is already there.
yes i have john and i have the same
settings as you posted.
-
I have a haas vf4 with a trunion table.
Im trying to do a 5 axis toolpath but the
B axis keeps unwinding and the tool
gouges. Im using a modified generic fanuc
5 axis mill post and mastercam x.
any help is appreciated.
[ 01-12-2006, 09:47 AM: Message edited by: snowman ]
iges and step version
in Industrial Forum
Posted
My customer is asking me what version do we use for step and iges files. Where can I find this information at?