My customer is asking me what version do we use for step and iges files. Where can I find this information at?

I just received a 256MB .stl file from a new customer. This file is to large to open in X5 so I searched and found this post, and downloaded the easy fit software. I try to open the file in easy fit and I get a to little memory error. Any suggestions?

Thanks for the reply I will see if I can make this work for me.

I have a hmc with a fanuc series 15-m controller on it. I am looking for a way to monitor cutting times over different periods is there a actual feed or spindle on timer that could be reset and monitored?

I have had this problem in the past check out this link web page or this web page-2

11) one big red easy button

I just played around with it Its a setting in your post code: use_frst_wcs: no$ #Use only the first WCS read and ignore all others in NCI make sure this says no

check lock on first wcs under misc values 0=no 1=yes

space bar works for fast point also

Allen I have update cplane and tplane when changing view checked and reset cplane to top in iso view unchecked. Also when I rotate around the x or y every thing works normally its just rotating around z I have a problem with.

That works john316 but as soon as you spin your gview and then try to set your gview back = to your tc plane it screw your view and tc planes up.

any time I rotate around gview about the z name and save this view and make it active I can not get the tc planes to update automatically. and then when I set planes = to gview they wont stick. Is there a setting that Im missing? using xmr1 [ 02-24-2006, 03:06 PM: Message edited by: snowman ]

quote: scary Dont forget who taught me.

Greg, check your mail.

I just changed one of my mazaks parameters with a m32 control to run the mazatrol library. I changed f92 and f93 to this. f92 10101000 f93 00001000 You may want to try to stage a tool to see if this helps your tool changing problem code: 105 (DATE - 22-02-06 TIME - 10:25) N25 G20 G0G40G80G90G94G98 G0G28G91Z0. G0G28X0.Y0. (1-1/2" APFT TOOL - 25 DIA. OFF. - 25 LEN. - 25 DIA. - 1.) (ROUGH ID) T25M6T30 G0G54G90X3.6667Y0.S100M3 If you want a can send you a program to look at.