s0l0seven
-
Posts
45 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by s0l0seven
-
He is right about the mouse thing, it would be pretty sweet.
-
i will study harder [This message has been edited by s0l0seven (edited 06-07-2001).]
-
hay guys how come its not 160xy 8(20+y+x) = 8(20xy) = 160xy That’s my story and I’m sticking to it
-
This calculator can do it all; its just figuring out how to tell it to do something is the bitch about it. (TI-89)
-
My $150 dollar calculator says "to few Arguments"
-
any thing but reduced fat
-
I am sorry i was wrong, 7 or 8-axises lathes http://www.hardinge.com/Pages/111_11_TT65.html [This message has been edited by s0l0seven (edited 06-05-2001).]
-
i got none, but i know there are 8 axis lathes out there. i was just wondering because all you hear about is 5 axis this and 5 axis that. what about 8 axises
-
how many axiss can mastercam control [This message has been edited by s0l0seven (edited 06-05-2001).]
-
I was wondering, If you have a lathe with 2 terrents and a sub spindle on an axis it self. Figuring that’s 6 axes. Can Mastercam handle that? PS CAN I CHANGE MY PASSWARD, IT REALLY PI$$ING ME OFF
-
In my opinion as a student, the tutorials do lack an explanation on why you do what you do for the result. But you do retain the knowledge you gained from doing the tutorials, because it is experience gained through trial and error that helps you to retain that knowledge. Just like working at the same company for ten years. You know how it should be dun. But on the down side you may gain tunnel vision, only seeing one way of doing that task. [This message has been edited by s0l0seven (edited 06-03-2001).] [This message has been edited by s0l0seven (edited 06-03-2001).]
-
SOME ONE TOLD ME THAT THE DESIGN TUTORIAL IS JUST LIKE THE MILL TUTORIAL ONLY WITHOUT THE TOOL PATHS. IS THIS TRUE
-
Gstephens, would you be willing to send me a copy of this powerpoint presentation showing the calculations for the 5-axis tool paths. Thank you my email is [email protected] if the hyperlink did not work here is my e mail [email protected]
-
How do I create a hyperlink in the forum? like for [email protected]
-
Hay guys, I have the 5-axis mill Tutorial and I was wondering if there is a generic post in one of the mcam folders that will support 5 axis work. Or can you send me one my email is [email protected] don’t care what control it is just as long as I can see the 2 Extra axes
-
Hay guys, I as wondering what the computer language is called used in posts and chooks thank you.
-
Thank you for your comments on the post book,I have been thinking about acquiring the 4 /5 axis mill Tutorial, to help me get better at surface creation and machining. If some one has this book could you please tell me what you think of it, is it worth $65.00 or is there a better one some were.
-
Hi guys, I heard there was a book that tells how to make posts, if some one has this book could you please give me an ISBN number and tell me were you got it from and what you think of it. Thank You.
-
ISBN: 1-894487-04-4 (THE SAME ONE SHOWN AT THIS WEBSITE)
-
Hello I am a student who is using the Mastercam Mill Training Tutorial V8. I have a question about a surface problem I am having (I don’t know witch one to use) can you help. It's the one right after Tutorial 15. Mill tutorial 15 exercise 1 Thank you