Update window to 64 bit 

9 minutes ago, Colin Gilchrist said:

Rolldie is a Chook (add-in program to Mastercam). It is used for 4-Axis cuts, where the spindle must be offset from the centerline of the rotary axis. (With Axis Substitution, your tool tip always points towards the rotation centerline.)

It was created to allow users without a 5X license to still produce complex slots, on a 4X machine.

Thanks for your help Colin. I am really appreciate it!

Hi everyone,

I am trying to learn 4axis toolpath but I run into this toolpath that I have never see before or how to create it. Could someone show me how this toolpath was created.

Thank you!

Thanks for the help, I solve the problem by creating a new wcs.

8 minutes ago, nickbe10 said:

Assign a single Work Offset (G54) to all the  planes being used in the Plane Manger.

Hi Nickbe10,

I try but the work offset unable to stick to the number that I assign to. Thanks for your help

Hi everyone,

I am trying to learn 4 axis rotary milling. Everytime I posted with mpmaster, I have three different work offset? Is this have to do with the post or machine definition control? Thanks for the helps

Hi everyone,

I have an old Post from Version 9.1 and I wanted update it to 2018 version. it there a way to do it?

Thanks so much for the help!

Thank you for all the tips! I used RaiderX advice, .5 with .01 work like a charm

Hi Everyone,

I am cutting a profile on alum. sheet .125 thickness. Just wonder how long and thinkness of the tags to leave it.

Thank you

Hi Everyone,

Does anyone know how to turn on a haas vf2 coolent noozle in parameter?  I cannot access or highlight the coolant position in tooloffset page.

Thank you

.nc file will not work, change your file to .txt. That will work

just wonder does anyone leave .005 on the floor and come back with a finish path or none? what is best

Thank you

I would like to said Thank you for all of you guys help! Happy New Year everyone!

Thanks!

I am curious, I thought mpmaster post is for fanuc control?

Hi David,

I did what you said and it load without error. But I was afraid what will impact with the part at the end.

Thanks

Thank you for a quick response! I will try it out

I just wonder does anyone run into this error when startup mastercam? or know will effect to the programing at all.

Thank you

After I update 2 for mastercam 2017, a message at the bottom of the screen said "waiting toolpath disk....." when I make a new toolpath or a dirty operation. Have anyone run into this after update 2?

never mind, I find out what i did wrong.

Thanks

Hi Everyone!

I am using mc 2017, I was able to pull my own logo on the sheetup but having a problem removing the orignal logo that stack right on top of my logo. Any idea or advise to remove it.

Thank you

Hi Everyone,

After I update mastercam 2017 to mastercam 2017 update 1, the Plunge rate no long able highlight or make changes. Is that a setting that I could change to make it highlight again?

Thank you

thank you for the tip, i will do that

How do i analysis counter sink degree on a solid in mastercam 2017?

Thank you

Thank for your input! yes, would be a big booboo at the machine if someone doesn't do the setup right.