Thanks Gcode!

Just curious, exist hoaxes and rumors that X will have the option of choice the new GUI interface and old GUI Interface.It´s truth?Somebody hear about that?

What the version of your Mp dll? Mp V9.05 have a bug that cause this problems with comment in wrong places.I had this problem when used V9.0SP1 Look here: http://www.emastercam.com/ubb/ultimatebb.p...t=009430#000006 HTH

Dave, I put the file called FE1194_PSTBUG.ZIP inside the folder MC9 files. But is stranger that works fine before the reinstall. I believe that you don´t know portuguese, when some translations: In my post # Your Original post sdr00 "SIMPLES" # "DRILL/CBORE" sdr01 "PICA-PAU" # "PECK-DRILL" sdr02 "QUEBRA CAVACO" # "CHIP BREAK" sdr03 "ROSCAR" # "TAP" sdr04 "ALARGAR" # "BORE1" sdr05 "ALARGAR" # "BORE2" sdr06 "MISC 1" # sdr07 "MISC 2" # sdrnote # Target string Look the names of field called "Operacao" (Operation in original post), the "Pica-Pau" (Peck-Drill) cycle here in my system is showed like "Roscar"(Tap) and "Roscar" (Tap) is showed like "Simples" (Drill/Cbore). And when I close the IE, mastercam shows me a dialog box that say that errors are detected. Stranger not? Another stuff, it´s normal after close IE Cimco Edit open and show the HTML code generated? Thanks for all until now.

Thanks Dave!

A observation, if someone go try, use different cycles, for example: 1 Op - Drill Simple 2 Op - Peck 3 Op - Tap .... Thanks again

Yeahh Ron, I save my config files before the reinstall, and replace above standard config files.

Hi folks, I reinstall Mcam today, and after this, HTML Setup Sheet post works wrong when found drill cycles in nci file. I don´t change nothing in PST file, and at morning of today, before the reinstall, works fine. I´m using MP V9.19, and he shows me the error message below: Combined Mill and Lathe Post Processor Version 9.19 © Copyright 1992-2004 CNC Software, Inc. Processing file with HTML_FAUTEC... Nome da Peca Descricao Operacao Cliente EMBRAER OF Programador DANIEL Maquina - 1 -> HAASVF2SS 2 -> FERDIMAT CMA154 1 Descricao Fixacao MORSA Outras Observacoes Selector variable nextdc = -1.0 out of range for string select. Postblock label ptlchg I look this postblock, and nothing wrong with her. This Setup sheet is customized for me, but always works fine. I download the version of standard format in emastercam tools page, and compare yours postblocks with the postblock of my post, and are equal! I put the post for HTML setup sheet created for me in FTP, into Text&post files, HTMLBUG.ZIP. The images called for this post are different of standard pictures, but the principle is the same. Please, if somebody can, create 2 or 3 drill toolpaths and try run my post. Thanks in advance

Thanks Ron!For you and your family, happy Easter too!

Create new address with (New button) the values below or try this values in Properties Box: Site Name: Emastercam (Or put the name like you want) Host Name/Address: www.ppcadcam.com Host Type: Automatic Detect User ID: mastercam Password: swiss Put the settings exactly like above, respect the lowcase format. HTH [ 04-08-2004, 05:13 PM: Message edited by: Camfun ]

I don´t know yet. My boss was talking with our resseler about that. But one thing I know, my boss still a tight-fisted Maybe for this reason he be my boss...

Hi guys, my boss bought the update V9.1 SP2, and I love it the new features. Now I can share of yours knowledge stored in yours minds for this version. Thanks for CNC software and my resseler and my boss. And thanks to yours too.

Vericut solve this.

Thanks Mike and MayDay.

Stranger. I am surprised! Not wait for something like this! How mastercam post in this format?