jagg2499
-
Posts
170 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by jagg2499
-
-
I have the top of the holes selected not the bottom but my hole depths are all the same from the point selected, my concern is I am drilling .03 holes .125 deep and with the contour I have to have my retract set at an inch to clear the part and was looking for a way not to drill an inch of air above the part
-
X6 MU2 ......... I really need to change that
-
I am trying to drill holes at different z depths and checking incremental under reference hieghts does not seem to be controlling the reference on each individual hole. Am I doing something wrong?
-
I have a part with a 3/16 wide slot and the bottom is not 2D it has a contour to it, i want to just run a 3/16 ball endmill around it and have it just follow the contour. What would be the best toolpath to use?
-
its ok John I will let you slide I was just looking for direction and you gave me that
-
it is supposed to angel the other direction
-
I have not actually done it yet but his solution looks like it would work but I am always interested in more then one way to skin a cat
-
Thank you I got it now thank you very much for all your help
-
-
Sorry John thank you for the input i have attached a file with most of it done except for the area i am having trouble with i am looking to angle just one wall all the way to meet the opposite side of the pocket
-
I am pretty new to creating solids and am looking for a tip on how to creaet something. I have a large solid face and I am looking to create a pocket with an angled bottom. What I am trying to create basically looks like a whistle notch with a vertical wall not a perpendicular one. Any direction would be a great help thanks in advance guys.
-
We also use Hocut 795 and the stuff works great and no skin rashes at all. Maybe they have it mixed way too strong or something.
-
Thanks for looking into it and your right Zig-Zag does work, also I guess i should have mentioned I was using one-way. I looked at the code too and it looked alright to me too.
Thank you for logging it John
-
When I post out a facing tool path with depth cuts I get a Warning !! ................... Invalid tool motion detected within depth cuts. Operations require regeneration. Cancel post processing? ........... Then when I cancel the op turns dirty, I regenerate it and it is ok but when I try posting it I get the same error again. Anybody seen this before?
-
Now that is pretty darn funny right there !!!
-
ingersol indexable spotting drill. +1
I agree works great
-
Then in that case did Colins information help you or do you have other questions?
-
All very good info given but i am going to ask the simple question. What level of Mastercam do you have?
-
Does anybody know the font name that they use and how to get it and load it into Mastercam ?
-
i got it to work the way i wanted to with contour ramp thank you for all the help guys
-
i am useing slot mill .......... does contour with ramp work better? i created a rectangular shape is that the same?
-
I am trying to mill a slot and i keep getting an error that the toolpath will not generate. last time i used this path and it has been awhile i remember i think that you had to create the geometry a certain way any help or suggestions would be great ......... i am using X4
-
yes i can thank you that worked perfectly
-
I am kinda new to solids and i am trying to creat a fillet from a solid that is kinda shaped like a hockey puck to a cone that is sticking out on the side and i am and using face to face fillet and keep getting an error that says : Both sets of faces must include faces from solids . they are both solids so i am looking for a little help like i have a seeting wrong or something
i am using X3
Good Mill house
in Industrial Forum
Posted
We are in Romulus, what kind of work?