manel
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by manel
-
-
sorry
-
Hi i want to rough a pocket using 3d area roughing ; i dont know how to limit working to the stock not all the boundary please have a look at the mastercam file . there is a huge waste of time , how can i solve that to make the toolpath recognize the stok . should i change the strategy? Noyau sup.mcam
-
THANX FOR YOUR HELP YOU MAKE MY DAY
-
I DONT KNOW HOW TO TURN ON G112 ;PLEASE IF YOU DONT MIND TRY TO APPLY THIS IN THE MASTERCAM FILE
-
-
thanx for your help i will share the part ,and try to look to the g code and see how linear toolpath became splines or arcs emastercam.mcam
-
thanx for your help please have a look at the g code , and see what i get . it is a linear contour but i dont get a linear toolpath how can i fix that ? contour.NC
-
WHERE I CAN ADJUST THAT
-
Where i can find thid button 'linearise helix,??
-
-
hi i am using the 2d high speed mill .the problem is when i see the tool path the toolpath is correct , but when outputting the G code the toolpath is not corret there is no linear toolpath it makes circle and domage the part
-
where i can define the depth of the top of island, i dont find the function ,
-
look at this document , we can do island facing with 2D high speed, i dont know how to define the geometrie,
-
look at this document , we can do island facing with 2D high speed, i dont know how to define the geometrie, LoneStar_MasterCamX5-Mill.pdf
-
HI i want to cut in 2d dynamic high speed , i have an island in the pocket .How can I define the island geometrie please how can i do selection of geometrie to define the island
-
sorry , but i have posted may mastercam for solidworks file mY question is what is the best tool path to cut a piece from a large stock in order to machine it with the right dimension later . i used countour ramp but the tool is always engaged and steel down , i can't do retract after each depth
-
HI i want to cut a piece from a stock and then machine it to the exact dimension. which is the best toolpath to do it ? which toolpath allows to ramp or helix around the piece without plunging directly into the material i used to use countour ramp but i think it is not efficient, it plunges vertically to the material CUTTING PIECE.SLDPRT
-
i used to work with solidworks , geometry creation with mastercam is difficult , and when exporting solid bodies it is difficult to offset surfaces extend contour ..... thats why mastyercam forsolidworks seems easier for me .
-
-
THANKS I SET MY PLANES WITH PLANE MANAGER AS I USED TO DO WITH MASTRECAM THINGS ARE DIFFERENTS WITH MASTERCAM FOR SOLIDWORKS PLEASE HAVE A LOOK TO THE ATTACHED FILE e mastercam sample.SLDPRT
-
WHEN I DO SO I GET G54 AND G55 NOT A ROTATION OF A AXIS
-
-
thanks you i have done the toolpath in mastercam for solidworks 2017 when generating the g code i should have A90 but there is not rotation of a axis please help e mastercam sample.SLDPRT
-
thank you , where can i find axis control in mastercamforsolidworks