Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi
i want to rough a pocket using 3d area roughing ; i dont know how to limit working to the stock not all the boundary
please have a look at the mastercam file . there is a huge waste of time , how can i solve that to make the toolpath recognize the stok .
should i change the strategy?
Noyau sup.mcam
thanx for your help
please have a look at the g code , and see what i get .
it is a linear contour but i dont get a linear toolpath
how can i fix that ?
contour.NC
hi
i am using the 2d high speed mill .the problem is when i see the tool path the toolpath is correct , but when outputting the G code the toolpath is not corret there is no linear toolpath it makes circle and domage the part
HI
i want to cut in 2d dynamic high speed , i have an island in the pocket .How can I define the island geometrie
please how can i do selection of geometrie to define the island
sorry , but i have posted may mastercam for solidworks file
mY question is what is the best tool path to cut a piece from a large stock in order to machine it with the right dimension later .
i used countour ramp but the tool is always engaged and steel down , i can't do retract after each depth
HI
i want to cut a piece from a stock and then machine it to the exact dimension.
which is the best toolpath to do it ?
which toolpath allows to ramp or helix around the piece without plunging directly into the material
i used to use countour ramp but i think it is not efficient, it plunges vertically to the material
CUTTING PIECE.SLDPRT
i used to work with solidworks , geometry creation with mastercam is difficult , and when exporting solid bodies it is difficult to offset surfaces extend contour .....
thats why mastyercam forsolidworks seems easier for me .
THANKS
I SET MY PLANES WITH PLANE MANAGER AS I USED TO DO WITH MASTRECAM
THINGS ARE DIFFERENTS WITH MASTERCAM FOR SOLIDWORKS
PLEASE HAVE A LOOK TO THE ATTACHED FILE
e mastercam sample.SLDPRT
thanks you
i have done the toolpath in mastercam for solidworks 2017
when generating the g code i should have A90 but there is not rotation of a axis
please help
e mastercam sample.SLDPRT
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.