Scott Bond
-
Posts
1,894 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Scott Bond
-
-
Hi all
Our Haas-fadal's hold about .0005 (per side)
Our OKK's are a bit better, but we still have to fuss with them for any real true positioning.
This is my method (when it's practicle)
I put a point in the center and use it as the first chain, and the full circle for the second chain. I use both entry and exit lines and arcs with entry and exit points checked.
Sometimes I still have to useboreing heads,custom carbide form tools, and reamers. There just doesn't seam to anything that works for everything.
-
Thanks , it looks great.
-
7791341-bscrev-.igs
7791342-bscrev-.igs
-
Thanks for all the support guys.
For those of you that want to try the converson,
I put a copy of each of Jay's FTP under "files to be converted for MC"
If we can't use or find an easeier way, I will be starting the Mastercam labor way on Friday .
(the customer will be of no help on this one)
Wish us luck
Scott
-
Good Morning
I was just hoping that I missed some magic feature from version 7, or 8.
Thanks
-
Hi all
I receaved some boeing files that are all wire, and they are 3-d wire, but there are no surfs. Is
there a simple way to make surfaces to the wire frame.
I know we have some labor intensive options, but i'm looking for a "fix the problem" button.
Thanks , Scott
-
Would it be possible to adjust the stock size of op-1 in verify so that one side of the material is at y=0, then with the stl gets created the front of the stl would be a lathe profile.
-
.70 A POUND,(U.S.)
For .80 a pound I need over 100 pounds.
For .70 an insert I would need a skimask and a gun.
-
.70 cents, maybe .80 if you have a lot.
-
I was the first to call
-
The only fact I need is an accusation .
-
a RAthER disturbing report just in:::
We have a document that shows J.M.'s beanie propeller was in fact made with Surfcam.
-
thoskins,
I am not convinced the dealer would say that solids wouldn't apply to this type of project.
Would it be possible to have anothet talk with your dealer with the specific question you asked us here? Or show him a copy of this thread.
-
Hi Jay
We just get a bunch of what is posted below.
We gave this project back to sales,,who gave it
back to the customer.
Thanks for the info guys, but this project has
been canceled.
MaZaK
000C0200000012000000000000000000000000000030100
23C00000000000000000000000000000000000000000000000
0000000000002030000002F000000000000000000000000FFB
4C0FF8C3F3000000000031000033CFFAED9500000000000
0000000000000000000061040000004B040000000000000000
000000000000000186A00000000000000000000007D00000
1000043C00000000000000000000B20161000DFF0002100F0
80008000000010003D090001312D00000A587000186A00002A
800000000000000B4000005DC9A1000053CC1010000001E
000000000000000000000000155CC0FFFFB1E0002625A0000C
000000000000000000000000000000000061050000004B0400
005A1000063C000000000000000000000000000186A0000
0000000000000000000000000000000000000000000B201610
DFF0003000F03080008000000010006CC1000073CDDD000
-
It's the customers mazatrol file blal##bla.MZK
They gave it to the sales man
"you don't even need to program it"
-
covert MZK file to .nc ?
Can this be done?
-
Hey jay,
What gives with the fancy look on that screen shot.
How you been ?
-
medaq,,your on track,,the first post in this thread is over a year old,,I am now drilling from each side-- then capping the ends with "O"rings.
I ordered thru spindle coolant spade drills today from AME 8" drill and an 18" drill so I can drill deep from only one side.
Thanks all
-
Good morning all
This project will not leave me alone.
I will be makeing a 25" long part with two .937 diameter holes thru it. I intend to use our 50t horizontal for the travel, and hand load a .937 diam. spade drill 13" .long, with thru coolant. We will drill entry(pilot) holes ,then drill more than half way thru each side with a spade,and Oringed caps will seal the ends of part.
Thanks for all the prevoiuse tips, I think I used a little bit of each post.
Are any of you guys produceing a drill that I could use?
-
I use the solid layout feature for this.
If the part was scaled .25 to fit the paper.
I scale the drafting 4x.
Then I put the demtions about where the print has them.
If the print is metric , I draw metric, line check it, then scale it beforte programming.
-
I saw it myself in my email,,,"leaky fauset"
-
The Boy --Kenny--
" Cassie is this truck with one headlight following us ??"
Cassie===========
"Oh! that's just my dad."
no worries
-
cadist, you have been an exellent member.
I really liked the cat thread.
Scott
-
Welcome to the board,
quote:?....."MastercamX"?...new version or am i thinking Malcom?Malcom? ---enlighten us---
Haas chip auger clutch?
in Industrial Forum
Posted
Hi Cmr
The only one I know of is when the operator wedges a large piece of stock in ours to seize it up.