Thanks for all the the emails and responses. I have someone from the Forum that started programing the part last night. I saved all your contact info for future ref. if needed, helps to have others for backup because workloads change. Many Thanks again Steve E

I am a one man shop with Mc 9.1 mill level 1. looking for someone to do offsite programing when needed, right now i have a part that is 6x6 in. with pockets and a small 3d slope. have iges files. looking to send out more of my 2d programing also please call or email me if interested . Thanks Steve E Santa Clara Ca 408 986 1386

Thank for the responses, is there a way to scan a hand dwg and convert to dxf? Thanks for the help Steve

I need a dxf of a turkey profile (side) that will fit inside a 3.5 dia. ,not too much detail just

This is an old scam,I received a letter from Nigeria A few years ago with the same type of request. Once they get your Bank acct # and other info the clean out your account Steve

Got it, the error was in define tool, tip diameter setting. Thanks! Steve

Hi Mike I checked out the other thread,not helping my problem. What am I missing here? Thanks Steve

problem is .01 offset too much in x or y. tool is .25 chamfer mill contour type= 2d chamfer width= .020 tip offset= .01 feed.05 abs top 0 abs depth 0 inc or abs cutter comp is on left with these settings I get a code output of z-.030 x-.040. z is correct but the x and y is .010 too far from the part. Ver 8.1 Thank in advance for any help Steve