-
Posts
86 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Salt4cad
-
-
-
Thanks Johnny
hope all is well
-
any ideas when X+ for version X9 is comming out I miss it
-
please guide me to the x+ link
thanks
-
Can't get x+ to work in version 6, any ideas ?
-
Is x+ fro x6 out yet ?????, if so please direct me to it, Can't wait love it in x5
-
Hi I have x5 loaded and running, and I had x4 set up+ and working, Now does setup for x5 change any of my custom setup settings???
please help
I love this set up sheet
-
OSG Drill are the way to go, CHeck them out
-
Slice Other wise you get crap
Doesn't MC quality check this
-
"Culture of Corruption" it's not a bug.
It's a feature
-
I really enjoy the depth calculator it alway tells me a weird angle of my tool tip
-
I love X+..Well, Does anyone know how to get the CHUCK in the available parameters in the X+setup.xss file, the one from the on from the tool parameters page on the bottom named chuck. I would like to tell the set up person what to use.
-
How can we obtain the Verisurf hole axis chook?
-
Sperial mill works great you can use higher feeds Uses less cutting preasure a rough and a fininsh pass holding .0005 on dia. on a 97 vf3
-
I had some what the same with the rotating of the wsc 45 deg it would not rotate to 45 came up A) , Had to save the file and bring it back in to work. Some kind of rounding errors
-
I use a 9.0 dia, flycutter 2000 rpm,s f5.
w a tp 41 diamond tipped insert kennametal
if using a vise be sure your sides are square to the top also mittee bittes work well, nest it in
have fun
-
Well. I foound out what it was.
You can not remunber tool using multiple machine groups.
Thank Mastercam You did it again
-
Just will not renumber, the only differance I did was I copied down the tools in the tool manager, other than that it usually it works.
-
Has any one had trouble renumbering tools.
-
Insert drill to 1.375
3/4 em mill bottom
3/4 em sperial mill to semi finish dia.
bore use Wallhopther multi-bore
done
good luck
-
I made a bracket and attached some coolent lines and a regulator to the side of the machine.
And when that tool comes up... at a Moo (machine stop) the operator turnes on the air. I do not prog m8 , When the tool is done, Moo shut air off.push button and go.
-
Dave,
I like that 54=G54 and so on
can you show me were in the post you make the changes
john
-
I totally agree With you Matt, "You can't be sure of what tou get"
-
How about differant tool holders for other than high speed tool paths clearances are issues
CORNER ROUND TOOL IN VERIFY
in Industrial Forum
Posted
THANKS JOSH THAT WORKED