THANKS JOSH  THAT WORKED 

RAD TOOL Screen Shot 06-26-18 at 08.43 AM.BMP

DOES THE OPPOSITE OF WHAT IT SHOULD

COM ON MAN 

Thanks Johnny

 hope all is well

any ideas when X+ for version X9 is comming out   I miss it

please guide me to the x+ link

thanks

Can't get x+ to work in version 6, any ideas ?

Is x+ fro x6 out yet ?????, if so please direct me to it, Can't wait love it in x5

Hi I have x5 loaded and running, and I had x4 set up+ and working, Now does setup for x5 change any of my custom setup settings???

please help

I love this set up sheet

OSG Drill are the way to go, CHeck them out

Slice Other wise you get crap

Doesn't MC quality check this

"Culture of Corruption" it's not a bug.

It's a feature

I really enjoy the depth calculator it alway tells me a weird angle of my tool tip

I love X+..Well, Does anyone know how to get the CHUCK in the available parameters in the X+setup.xss file, the one from the on from the tool parameters page on the bottom named chuck. I would like to tell the set up person what to use.

How can we obtain the Verisurf hole axis chook?

Sperial mill works great you can use higher feeds Uses less cutting preasure a rough and a fininsh pass holding .0005 on dia. on a 97 vf3

I had some what the same with the rotating of the wsc 45 deg it would not rotate to 45 came up A) , Had to save the file and bring it back in to work. Some kind of rounding errors

I use a 9.0 dia, flycutter 2000 rpm,s f5.

w a tp 41 diamond tipped insert kennametal

if using a vise be sure your sides are square to the top also mittee bittes work well, nest it in

have fun

Well. I foound out what it was.

You can not remunber tool using multiple machine groups.

Thank Mastercam You did it again

Just will not renumber, the only differance I did was I copied down the tools in the tool manager, other than that it usually it works.

Has any one had trouble renumbering tools.

Insert drill to 1.375

3/4 em mill bottom

3/4 em sperial mill to semi finish dia.

bore use Wallhopther multi-bore

done

good luck

I made a bracket and attached some coolent lines and a regulator to the side of the machine.

And when that tool comes up... at a Moo (machine stop) the operator turnes on the air. I do not prog m8 , When the tool is done, Moo shut air off.push button and go.

Dave,

I like that 54=G54 and so on

can you show me were in the post you make the changes

john

I totally agree With you Matt, "You can't be sure of what tou get"

How about differant tool holders for other than high speed tool paths clearances are issues