Does anybody know if there is a way to make the auto curser symblos and tick marker larger.

Has any one figured out how to keep endpoint or center etc Modal when a picking end points arc, since the start of mastercam endpoint center was active until you selected something different? It seems cumbersome now to keep selecting end point center for every entity, I know about auto curser… It works good but in some instances picking a end point of a line one can pick a sketch point if you not close enough to the rear endpoint. Same instance in manually putting in circles or points. With x you have to keep selecting Fast point every tine for a new location, in v9 you could put in x.25,.3 enter x.5, enter and so on with out re picking the fast point.

Good for you, Is was a real mess, I still cannot believe it, Where was the QC on update 002.

thanks Roger, that a lot better set it to 1

Can anyone tell me how to make the verify tool display a solid like in v9, the transparent tool in x is very anoying

Does anyone have any fixes or answers to STL files when you bring then in in verify. It seems every time you transform, rotate them so they can be used in another operation "an approx of stock" alarm will come up. this gets very annoning

Thanks Steve, I'll fix the post now that i know where its called out john

Yea, thats the remidy, but shouldn't it work like it says, before..after. maybe the post can be changed to reflect it.

Has anyone tryed to insert a machine stop, MOO using the canned text in the opperatins manager. Every time I try it, it posts out after the tool comes down and not after the function itself. For example insert a m00. G0G28Z0 MOO T1M6

sorry for the typo, I hope this is addressed in "X" thanks again

HOW CAN I CHANGE TOOL HOLERS FOR EACH TOOL, IF NOT WILL THIS CHANG IN V11