Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

tazbierek

Customers
  • Posts

    58
  • Joined

  • Last visited

Posts posted by tazbierek

  1. this is real part, I have it on rotate table. first setup i will do bores, thenrotate 90 degree and do that part.the thing is i have to do thin on this setup so XYZ have to be as shown ,  I know i can be frustrating for u guys, but i have to say again i do that part on fusion 360 and it was peace of cake. but here i have like tons of questions. Sorry for that and english again and hope for your help 

  2. My next problem is with selecting contour, 

    I tried to draw a rectangle but always making a bad selecting. 

    image.thumb.png.38e97f0791e6b876268da5176ab025f4.png

     

    I need to cut this firs pocket using contour , after that i need using slot mil, but my problem is with selecting the geometry, how is the good way to do that ?

  3. I have to say that  I even not speak english well, i came to USA for work i found a shop and start learning everything.

    Its hard but i want to learn and im happy when i solving new prolems. Im really glad that i found that forum and U help me because u dont have to do that, Probably most of U paid for that informations, for your knowalge, u use uyour time and money and u doint that for free, i hope one day i will be able to help you guys!

    • Like 1
  4. Hi Guys its again me, i have a little project.

    I draw it in Fusion 360 which take me around mby 10 minutes. 

    Im trying to do that in mastercam and u know it take me now like 3 hours and i even didnt start 

    Its really really hard for me, 

     

     I know its too much but mby there is someone who can draw it for me in video ?

    I dont need the finish project but tutorial how to do that because in mastercam im lost right now 

     

    image.thumb.png.c69f38919af229e4cba97e46862f277f.png

     

    I Hope u will help me. Thanks in advance 

  5. Ok now i have this 

    image.thumb.png.3a737f93ced59b9a05c4138090553c42.png

     

    I set Containment, so now i understand that offset tool which is not bad in my opinion,

     

    Still dont know how to set lead in and lead out, startting point looks like doesnt work 

  6. Hi guys, i need to use paralelle on this project 

    image.thumb.png.d8db785288ec28aa4fd0797e001e3753.png

     

    It looks ok but i need to put start point away from my solid, also i needput some additional offset from center of my tool , but whatever i use ( inside outside or center)

    the results are the same as shown on screen, can u help me ?

     

    And hope u know what i mean 

     

     

    i see that 

    image.thumb.png.205eaf9024cc4623aece12309c59f939.png

     

    There is (o) in conpeinment .

    Also i need to change lead in and lead out for the material /

    I see no option in surface finish parallel. 

     

     

  7. 1 hour ago, crazy^millman said:

    That is called parametric controls and Mastercam is not there for a CAD system. It is primary a CAM software that offers CAD where as Fusion is a CAD trying to squeeze CAM into them. 

    Hmm okay. Anyway have to use it as cad too so I need to try 

  8. Ok so i tried several options and,

    I select enteties, and usin dynamic transform, puting gnom in center of enteties, transform to midpoint nex enteties and after that puting values to set distance from that enteties, i dont know if its the simplest way but it works . But i have to say if its the best way then its a waaaaaaaay worse than in fusion where i can select enteties put d(dimension) and simply select enteties which i want and put values,.

     

    BTW Sorry for english, learning same as mastercam :) 

  9. Hi all, one quick question

     

    I want to put some points how to define xy position like here ?

    I need to put some dimensions between point and that enteties 

     

    Untitled.png

     

    There is no option dimension between that enteties and point? is it really hard to do that? 

    I dont want to put position from origin because i need to calculate it, and i can just delete mastercam and use calculator. also i dont like if i have to need create new origin or plane, because i will lost with that, there will be so many other origins then which i dont like i just want simply dimensions. 

  10. HELLO everyone.

    I need help to configure my dnc and parameters on my machine . I dont have tape mode on my machine so its hard.

    I can send it to my machine and from machine to dnc but I have no much space for programs and o need to run it automatically from my DNC with USB port. 

     

    Can anyone tell my how ?

    I'm using rs232 port which looks like that one . And here u can see my dnc and my control panel

    20200916_191719.jpg

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...