~~~~~~~~~~~~~~~~ Where exactly is A hole? ~~~~~~~~~~~~~~~~ This is called privacy . Bunny the cautious

With a help of hatch command you can do nice tricks on 3d surfaces

Little tip : Scrapped part in many cases can be used as a nice ashtray !

Thank you ,guys !

What is your insert corner radius ,watermaker ?

Well ,I have something to contribute too Fast way to check if contours are closed . If you have 200-1000 contours it can be a challenge ,right ? Not if you`ll use create->drafting->hatch command ~~~~~~~~~~~~~~~ Hatch entities are fill patterns inserted within closed curve boundaries in a drawing. ~~~~~~~~~~~~~~~~~~~~~ If some contours are not closed ,the hatch will be unsuccesful and this contours will be marked in red . PS Hi ,Winnie ,I am in !

Use this : quote: Transform toolpaths copy and change the orientation of previously created operations. You can use this function to translate, rotate, or mirror operations. You must create an operation before using the Transform function. The Transform toolpath is associative. If the transform function is used on any operation and the operation’s information changes, the transformed operation that is linked to that toolpath is also updated. Transform toolpaths are available in Mastercam Mill and Lathe by choosing Main Menu, Toolpaths, Next menu, Transform. For more information about transforming wirepaths, see Transform wirepaths. Note: You can also translate, rotate, mirror, or scale operations using the Edit NCI C-Hook, but the resulting toolpaths are not associative. 1. Create a toolpath. 2. Choose Main Menu, Toolpaths, Next menu, Transform. 3. Select Translate from the Type area. 4. Enter the Transform Operation parameters. 5. Select the Translate tab and enter the translation parameters. 6. Choose OK. The translated toolpath is added to the Operations Manager. Notes: ¨ You can also copy a toolpath to a new location by choosing Toolpaths, Transform from the right-click menu of the Operations Manager. ¨ If the original toolpath is changed, the translated operation that is linked to the toolpath is also updated. ¨ From the Transform Parameters dialog box, you can select a transform operation and transform it again (i.e., create a transform of a transform toolpath).

Hi ,All ! I am a brand new forum member ,hoping to contribute.