Ekke
-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Ekke
-
Hi, I have troubles to post operations without opening the editor after each post. Is there a way to do it silence? Or is there a way to close the editor per code? code: If (flag_OP_Selected And Not flag_OP_Dirty) Then PostOperations = Toolpath.RunPost(opInfos1.operationID, ncFilePath, False) End If Thanks in advance Ekke [ 03-21-2007, 11:09 AM: Message edited by: Ekke ]
-
read nci with nethook
Ekke replied to Ekke's topic in Mastercam C-Hook, NET-Hook and VBScript Development
quote: it is calculated by processing the (selected) toolpath operation data. Is it not possible to give access to this function through nethook? -
read nci with nethook
Ekke replied to Ekke's topic in Mastercam C-Hook, NET-Hook and VBScript Development
Hi Roger, quote: You're looking a a lot of work to parse the NCI and calculate the data you are asking for. Ok, I understand is not so easy to do that. Maybe there is a way get these informations from Mastercam? quote: It would be a much easier to get this information using a Setup Sheet generator like Mill.SET (which is actually a 'type' of Post Processor, just with a ".SET" extension) I know about this, but I like to use vb.net. -
Hi, can someone help me to read nci with vb.net? I need for each Operation minZ and the time. Thank You
-
Thanks Mick, but I need a clear number, because several tools can have the same tool number. ekke
-
Hi, is it possible with nethook to get the Tool-ID of a Tool used in a Operation? ekke
-
Thanks for helping me MasterShake, You helped me really much. Now I can go without problems through the Operations. quote: MCFile.SaveMCAs(mcamName,1)' Save cuurentMCFile.NewMC(0) ' Reset DatabaseMCFile.GetOperations(mcamName,array) ' Open File and Read op arraylist... To save first the file is not a good way I think to solve the problem, but with your hook it works fine. Ekke
-
Thank You again for Your help MasterShake. quote: I dont have time to check min/max value of nci No problem. Ekke
-
In this sentence I get the following error: "1 duplicate entities were not brought in" code: If MCFile.GetOperations(f, opsList) Then What means this error?
-
Hi MasterShake, thanks for Your help, it works fine. But there is also a Z-Stock to leave, maybe you can help me again? I don't no how much work it is for you but I need some more infos: Cycle Time: Feed and Rapid MAX and MIN Z Thank You Ekke
-
nethook - GetNCIMinZ()
Ekke replied to Davidgil's topic in Mastercam C-Hook, NET-Hook and VBScript Development
Hi David, I tried this function but also without success, maybe a bug? -
Hi, how can I get the "Stock to leave" value with vb2005? Thanks
-
Hello, how can I determine the type of HSM strategies (CIMCO) like Adaptive Clearing or Horizontal clearing with VB-Script? With "GetOperationTypeFromID" I get always the return value 16. Maybe there is another way to get the type. Thanks for help ekke
-
Hello, how can I determine the type of HSM strategies (CIMCO) like Adaptive Clearing or Horizontal clearing with VB-Script? With "GetOperationTypeFromID" I get always the return value 16. Maybe there is another way get the type. Thanks for help ekke
-
I would like to see a way like this:(WorkNC) The parallel pencil trace toolpath takes the result of the 3D contouring toolpath and creates a series of parallel passes at a user defined width. Ekke
-
I would like to see a way like this:(WorkNC) The parallel pencil trace toolpath takes the result of the 3D contouring toolpath and creates a series of parallel passes at a user defined width.
-
Many thanks for your inputs I work also with Mastercam and am so far satisfied. I only wanted to know what other think about Powermill.
-
Hello, Does anybody have experience with Powermill of Delcam? It is better as Mastercam(faster calculation time, qualitatively better shaping-ways ...)? For information I would be pleased. Silas
-
Hello, last week i downloaded Mcam 9 but the Zip is protected with a password. What can i do to get a password?