@Mastercam
-
Posts
79 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by @Mastercam
-
-
29 minutes ago, #Rekd™ said:
If it is a simple cone just do the layout with a compass.
Thank You! for additional Information
it would really helpful
-
1 hour ago, 5th Axis CGI said:
For a flat pattern? Try Splitting the surface in half and use the chook flattensurf.dll or might have to make wire frame and try the unroll. There are formulas to covert a cone into a flat shape. Been years since I needed to make a sheet metal flat for a cone and would have to dig it our of my old books. If rolling to make the cone take stretch and elongation into account for the material. I worked in a Fan factory when i was in my early 20's and we made all types of exhaust fans.
4Thank You !, It works well
-
-
Thank you! Chally & Ron for the valuable feedback.
-
I agree with External Screen Setup.
But this issue only with Mastercam 2017/2018/2019/2020 Multiaxis strategy other window looks good 2D Mill, 3D Mill, Mill-Turn, Wire-Cut, Router......
Laptop - ASUS STRIX ( Republic Of Gamers )
-
-
-
I am using MPFAN.pst. for Mastercam 2020. During Subprogram with File Separation, One file Extra Generated.
File Indicated by the arrow is not required. Is there any other way to Close .aux this file
- 1
-
which script you are using right now?
-
-
How to get Arc diameter from Toolpath Hole Definition?
IN NC code.
-
-
-
Does anyone has a Buffer file ? pdf in detail
-
-
Thank you, #Alex it's working...
- 1
-
thank you for your valuable reply.
how I can implement the formula?
-
Hello,
kindly help me. To detect the number hole to selected in drilling & angle between the hole.
Is there any parameter or std. variable for no. of hole & Angle between them
row_holes : 1 fmt "T" 4 row_holes
pdrlcommonb if yinc, [ *row_holes e$ pfxout pfyout row_holes = 1 ] else, [ row_holes = row_holes + 1 ] pcom_movea
-
show an error #NotFound [CFN #0005]
-
hello everyone,
Need help to separate .nc output base on the upper and lower turret for lathe
-
How to override File extension( i.e .NC, .EIA.....etc) From .PST file
-
-
Hello Everyone Need help in Haas Peck Tapping Cycle ( G84 )
For Haas machine Tapping cycle with peck required Total Z Depth should be Divided by Peck1
is any std. Variable For this ....? or any Script for this...
Required Cycle Format ..
G99 G84 X0. Y0. Z-2. R10. F50. X0. Y0. Z-4. X0. Y0. Z-6. X0. Y0. Z-8. X0. Y0. Z-10. X0. Y0. Z-12. X0. Y0. Z-14. G80
Input Operational Parameter -
Total Depth
ptap$
Ptap_2$ also required for Number of Holes
-
Hole making enhancments
in Industrial Forum
Posted
Hello Everyone,
How to calculate Angle of First hole W.r. to Origin & Angle between 1 hole - 2 hole
Or is there any parameter to hook up value from Bolt Circle.