Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
surface leftover calculating to slow
using amd athlon 600 mhz 200mhz bus
but alot of surface used after comleted
alot cut of unnersery area,tool like
a jumping dance may be because gap or edge
Surface finish shallow , some area is miss
cutting v7 is quite better.
parraler and shallow the cutting feedrate
will changing to plunge rate after
plunging procces because after plunge procces
fedrate did change to cutting fedrate but
continus with plunge rate it to slow.
when running suface paraller machinning
at 0 or 90 deg 0.02 toler surface finish have alot of scracth line when on arc filter
but surface contour is ok because tool
nose only cutting when using pareller
but if not filter is very nice.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.