Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Thank You !!! @Goldorak
je savais que c'etait possible !! je l'avais deja fait pour faire un 6 pans .. mais je ne me souvenai plus comment j'avais fait ...
si je me souvient bien ! j'ai fait comme tu m'as dit un contour avec une fraise (que je remplacerai avec un outil a charioté dressé par la suite)
et j'ai mis une avance en mode ramping .. Merci !! bon la je n'ai pas l'option post processor sur mon ordi . je regarderai demain au travail si le programme est coherent.
Encore Merci a tous pour votre aide .
@#Rekd™
Before asking for help I of course look on the forum. and I came across the macro but if you look closely there is a Y programmer. even if it is at 0 it is even programmed. so my machine will issue an error. (then I don't know how to get a macro into the machine)
Thanks again everyone .. I hope it will work ..
(even if we have finally machined the bit of the machine to go faster.) there is also another way to do it. but I wanted the programmed, it's more fun :)
T020202
M110
M808
NLP1
ZZ1=0
PTC=0.1
G94 M146
G00 X400 Z0
G138
G0 X400
FF1=95000
XX1=111.5/2
G17
G0 Y0 C0
X=XX1
NLOOP
ZZ1=ZZ1-PTC
M15
G01 C180 X=XX1 Z=ZZ1 F=FF1
ZZ1=ZZ1-PTC
G01 C0 X=XX1-6 Z=ZZ1 F=FF1
IF [ZZ1 GT -13] NLOOP
G00 X400
G0 Y0 C0
G136
G00 X400
M109
RTS
@JParis yes I think I found on I use a cutter for the machining of the eccentric, with the axis C. but I think that the time will be much longer and as you said. not pretty surface condition.
Rekd
I have the HLE version 2020 at home to train and move forward
and learn what's new.
but at work I use the official 2017 version
Thank you #Rekd ,
but in your link there is nothing "explained !! I have to look at everything before posting. and indeed there is a Macro. but I can not test it on the machine. I am looking to achieve it with Mastercam.
Thanks for watching for me.
here is the file . there was an error. it is for a 3 axis lathe.
For the G-code.
no I have no example. he explained by on the videos.
EXCENTRIQUE.emcam
there is a lot of video on the internet of tour, which arrives there ... I hope that it is feasible on mastercam ..
I understand he was doing macros. (on the cnc directly) so mastercam can do it :)
Hello,
sorry i speak bad english. so I go through a translator :)
I have a problem. I can't figure out how to do an eccentric on mastercam. I rarely use the Tour. I am rather Milling.
I cannot select the diameter completely. only one section. suddenly impossible to make an eccentric. it makes me that a normal diameter ..
something must be activated. ?
here joined the photo.
and the file.
Thanks in advance.
Seb
EXCENTRIQUE.emcam
thank you for yor answer.
my machine is a 3 axis so I have to be machined from above.
I tested the engraving function. its not working in 3D. pity
I don't think I have a tool problem. I tried with several models tools.
Thanks for the sample file.
flowline or morph mode will be the most suitable for this example.
and concerning the 5axis machining .. my machine does not do it .. but I will keep the example to work on it .. the day when I will have a 5axis :)
Thank you again for your answers.
Thank you for your answers ...
it of course that I fully understand for the official version of the software .. so I will try to find a student version.
but otherwise, to come back to a question about the chamfer, the 3D chamfer function usually works.
but not in case there is an angle ..
Je vous remercie pour vos réponses ...
hé biensur que je comprends totalement pour la version officiel de logiciel .. je vais donc essayé de trouver une version étudiante.
mais sinon, pour en revenir a ma question sur le chanfrein , la fonction chanfrein 3D fonctionne habituellement.
mais pas dans se cas ou il y a un angle ..
Merci pour ta réponse ..
Ici on est plus a savoir si la version est légal ou pas .. plutôt que de répondre a une question ...
Dommage ..
Pour répondre a la légalité !! ma version 2017 est légale . et la 2020 non .. car je voulais m'entrainé chez moi ! au lieu de m'entrainer au travail en dehors des heures .. ce qui n'est pas permis dans mon cas ....
Puis si il faut acheter pour essayer .. bein sa serait la mort de plusieurs logiciels ... mais bon la on rentre dans un autre débats ..
Merci en tout cas .. je vais essayé de me trouver un autre Forum Mastercam Fr .... (ce qui n'est pas facile a trouver )
Salut , et désolé si je parle en Français..
j'ai un problème pour réaliser des chanfrein 3D sur une pièce incliné... (exemple simple en photo)
En attendant de trouver la bonne solution , Je procède avec un contour 3D en enlevant le rayon dans la compensation outil .
mais dans les angles je me retrouve avec des énormes rayon d'outil.
Existe t il une fonction caché . ? car l'option MODEL CHAMFER marche pas en 3D , ou alors je ne sais pas pas m'en servir.
Merci par avance.
ps: j'utilise mastercam 2017 et 2020 (débutant)
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.