Search the Community
Showing results for tags 'custom tools'.
-
Hey, So I have used quite some time now to create a full library of all the tools and holders we have at our workshop, I am still not done but getting there. I love the tool manager so far, but I there are some things I dont like and features I feel are missing. Yesterday I created over 80 new holders, I made them from the specifications I could get from the manufacturer. They didn'thave any CAD models so I had to draw/sketch them manually by looking at the catalogue. It turns out I did something horribly wrong... I created the holders with the origin at the spindle flange and the holders projected downwards (down in top view). I should have made them with the nose of the holders at origin and the spindle flange side upwards... or at least it seems like I should have don it this way. I then Imported them per Level. whenever I try to use theese holders they work fine in Backplot and setting projections in the toolpath menu, the problem comes when I try to use the simulator... when using the Simulator it moves the Holder down, or the Tool upwards so that the projection length is measured from the spindle flange side of the Holder.... I can't figure why, and I have used the whole day trying to figure out a solution without having to go through all the holders again. it took some time, and it would be like starting over again. The simulator is essciential to me as I run a 5-axis machine. Can anyone help me solve this? I have attached some photos to try to illustrate the problem. the photo name was an attempt to describe the photos.
- 3 replies
-
- holders
- custom tools
-
(and 1 more)
Tagged with:
-
Hi All, I'm trying to create a stock model from an op using a custom tool and I'm getting the following message: "Stock model regen failed to access toolpath data - unsupported type? unsupported tool or bad tool definition? missing custom tool file." The tool geometry is coming from a dxf file. I had no problems creating the tool and it verifies just fine. For some reason the Stock Model operation can't use it. Are there any special requirements for Stock Model that dictate the tool type or the location for a custom tool's geometry? Thank you for any advice, Dan
-
I am trying to make a custom corner mill tool and it does not show up right in the back plot or verify. All i get is a shiaght end mil.
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.