Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello,
I have a program that does not follow the entire chain it starts and stops just short of completing the entire chains.
I have two chains and the start of one is short and the end of the other is short.
The program should start at A+90 and finish at A-90 then moves in the X and then comes back to A+90.
The actual cut should starts at A89.523 and cuts to A-90, it starts back at A-90 and finishes at A89.523.
I have many parts like this I've done with no issues but this one is giving me problems.
I've checked my geometry to see if there was and issue with a surface or chain and I don't see any issues.
I also checked the lead in and out I just can't see the problem.
TIA,
Greg
HELP.mcx-9
Any 5-axis guro's out there that can help me with this simple groove test cut.
I'm trying to ramp down and not plunge into the groove, is there a way to do this without making a ramping curve?
Here is my mcx-8 file
https://files.verisu...e91057f17013cc9
Thanks
Ernie
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.