Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
i have noticed that when i cut a pocket in mastercam and pull up the g-code the feedrate for the pocket starts at F0 and does not exceed F.01. when i cut contours or drill holes and so on the feed rates are right. I do not have the feedrates on my tool manager because they vary to often and im working with my own pesonalized tool list. in my tool list the feeds are set as zero because the calculated feeds and speeds are drastically to high. i adjust my feed rates in the operation manager, but this cant be the problem because as i said contours, drilling cycles and facing operation are at the right feed rate. my shop is a production shop and going in and manually searching and changing each feedrate thats wrong in every part we make in mastercam is not acceptable because of the time it would take. is there a way i can fix this. i have attached a part of the g-code so you can see wat im talking about and a basic drawing of the part. i will answer any questions the best i can due to copyright issues.
N264 T11 M6.doc
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.