Search the Community
Showing results for tags 'or can it?????'.
Found 1 result
-
Hi all, We have a problem with our new vmc machine with a 0iMD control. We have 2x 4th axis rotaries which have different motors, and therefore different parameters. On our 0iMC machines, we have 2x separate programs. One is for each rotary with each different parameter set related to it's rotary. One prog is activated by M123, the other by M124. So we enter M123 in MDI, which automatically opens the control (pwe), writes/changes the relevant paramaters, alarms saying 'turn off power' and when we re-boot, the parameters are changed to suit the rotary. The M123 prog is below:- % O9002(TANSHING 5C SWITCH M123) (TANSHING RNC-115C SWITCH MACRO) G10L50 N1420P4R7000 N1423P4R360 N1821P4R7500 N1850P4R0 N1851P4R0 N2000P4R00000000 N2001P4R00000000 N2020P4R253 N2022P4R111 N2084P4R3 N2085P4R400 N6072R123 N6073R124 G11 % We have loaded this program into the D machine and changed the L50 for L52 as per the OiMD fanuc book, but it doesn't work. Has anyone tried anything similar on the D control, or got any ideas?
