POINT

[PcRobotic]

Hi,

I'm using POINT function is my PIN STOP the M0 still something that it is not making sense to me. Can you guys tell me what I did wrong?

 

I went to POINT, MISC VALUES and changing from "0" to "1" but it wouldn't output the M0 as I expected.... I must be doing something wrong.

 

Thanks a bunch.....

 

---------------------------------

%

O7268 (72-257286-00-REVA-OP1.NC)

(P/NAME= FIXTURE, DOOR ALGNR, POD LOADER)

(SOURCE= 72-7286A.MCX-7)

(POSTED ON DEC.26.2013 AT 10*07AM)

(S56 VERTICAL MAKINO)

(*)

(TOOLS LIST)

(T6 - .250, 1/4" CHMF - H6)

(*)

N6(.250, 1/4" CHMF )

G0 G17 G40 G49 G53 G80 G90 Z0

T6 M6(POINT, CUT#2)

G90 G54

X.25 Y-.5 S0 M5

G43 H6(D36) Z2.(DOC= Z-.5)

G1 Z0. F50.

Z-.5

=========> M0 is good to be here at the MISC VALUES ===== choosing 1 for M0 BEFORE OPERATION but not working....

X.75

M5 =========> Not needed

G0 G17 G40 G49 G53 G80 G90 Z0

G53 Y0

M1

T6 M6

M30

%

[crazy^millman]

Need to help us by putting up your post logic. I can put up 100's of lines of code, but without the translator that created that hard to know how to help you. A .z2gis always best since it will have the Mastercam file with the operation and post that you are having trouble with. Not the 20 guesses guessing game you have put before us.

[EX-wccprogrammer]

I have already posted the code elsewhere, but I will summarize here:

 

1. Name your tool something coherent. (maybe 1/4 DOWEL PIN)

2. Add logic to your post that scans the tool name for important descriptive words like 'DOWEL'

3. When these important descriptive words are found, certain features are suppressed (like S0 M5) and some are added (like M0 where you want it).

 

There you have it, piece of cake!

[PcRobotic]

Hi EX-wccProgrammer,

Do you remember your post tile so I can search for it?

 

 

 

Thanks

[Guest]

You know, search really IS your friend

 

http://www.emastercam.com/board/index.php?showtopic=73638&hl="dowel"#entry862026

[PcRobotic]

JParis,

The link is really helpful thank you for your extra hand.

[EX-wccprogrammer]

Truly a stroke of genius, JParis.

[PcRobotic]

Thank you, I did it and here is my new link to show somebody step by step who are just like me so they can do much things easier. I hope this can help them as if they struggled like I used to.

 

http://www.emastercam.com/board/index.php?showtopic=75967